Real vs Faux Corten Steel, How to Tell the Difference Before You Buy
5 products sell under the corten name in Australia, and only 1 of them is weathering steel. A framed real corten fence panel from our Byron Bay workshop costs from 395 dollars at 2260 by 1000mm, about 175 dollars per square metre, pre-weathered and ready to install. Faux aluminium panels with a printed corten finish cost 180 to 300 dollars per square metre installed. Rust effect paint needs recoating at 12 to 18 months in full exposure, by its own maker’s data sheet. This article gives you the 6 tests that separate real weathering steel from its copies, using the faux industry’s own documents as the evidence.
| Test | What it catches | What it cannot do |
|---|---|---|
| 1. Mill certificate and named grade | Every copy, before money changes hands | Needs a supplier willing to show paperwork |
| 2. Cut edge | Prints, powder coat and paint, the sandwich shows at the edge | A fresh cut on real corten is bright steel for the first days |
| 3. Scratch | Every coating, which scars where real corten heals | Takes weeks of weathering to read |
| 4. Runoff pattern | Unalloyed steel, whose runoff stays heavy for years | A supporting clue only, sealed real corten also runs clean |
| 5. Weight | Aluminium and plastic copies | Cannot separate mild steel from corten |
| 6. Magnet | Aluminium and plastic, which the magnet falls off | Proves steel only, never proves corten |
Which Five Products Sell Under the Corten Name in Australia
Real weathering steel is an alloy, not a colour. Copper, chromium, nickel and phosphorus are melted into the steel itself, and those elements build the tight rust layer that protects it. Everything else sold as corten copies the colour only. Printed aluminium is the premium copy, with brands like Metwood pressing a photographed rust image onto aluminium under powder coat, in finishes named Mainland Corten and Coastal Corten. UniCote LUX sells a Corten Red finish built from up to 5 printed layers on prepainted steel.
Rust look powder coat is the third product. Interpon sells a powder called Sable CoreTen with a 15 year global guarantee, and serious coaters apply it over aluminium only. Modinex sells a powder coat colour literally named CorTen. Entanglements in Melbourne lists a finish called Rustic on its finish options page, described as also known as corten, and describes it as a protective coating over aluminium. The same page separately lists real weathering steel as a material. Three different products sit under near identical rust language, and a buyer who never asks what sits under the finish cannot tell which one they bought.
Rust effect paint is the fourth product, sold by Porter’s Paints as Liquid Iron with an Instant Rust activator, by Murobond as Rust Paint, and by Dulux as a Design Rust Effect. The rust in those tins is a thin film of real iron particles sitting in acrylic paint.
The fifth product is the dishonest one, plain mild steel rusted in a yard and marketed as corten. YardSteel Australia warns about it in plain words, saying low grade weathering steel or even simply oxidised mild steel sometimes gets marketed as corten, and that these alternatives corrode continuously instead of forming a stable layer.
What Proof a Supplier Should Show You Before You Pay
A mill certificate is the only proof that works before money changes hands. A type 3.1 mill certificate under EN 10204 carries the heat number, the grade, the chemistry and the test results for the actual batch of steel in front of you. The heat number is stencilled on the plate, so the paper and the steel can be matched in seconds. No printed, coated or painted product can produce one, because there is no weathering steel in it to certify.
The chemistry line is where fakes die, and copper is the first element to check. Every weathering grade carries copper and chromium, because those are the elements that make the rust layer protect instead of flake. COR-TEN A runs copper at 0.25 to 0.55 percent, chromium at 0.50 to 1.25 percent, phosphorus at 0.07 to 0.15 percent and nickel up to 0.65 percent. Our Australian grade HW350A runs copper at 0.25 to 0.50 percent, chromium at 0.70 to 1.05 percent, phosphorus at 0.090 to 0.160 percent and nickel at 0.20 to 0.55 percent, and those ranges are printed in the BlueScope datasheet.
Some overseas grades run low phosphorus and qualify through copper and chromium alone, so phosphorus by itself is not the test. Copper is. Ordinary structural steel guarantees no copper at all, so a certificate with no copper is not a weathering steel certificate, whatever the invoice calls the product. Ask for the grade by name, WR350A, HW350A or CW300A under the AS/NZS standards, and read our corten steel grades explained article before you order. Australian Consumer Law bans false claims about what a product is made of, and the ACCC position is that a business must be able to prove any claim it advertises. A supplier who cannot show paperwork has already answered your question.
How to Tell Real Corten From Fake by the Cut Edge
Real corten is one material all the way through. The colour is the alloy itself, not a paint, so it is identical on both faces, a point even panel importers state in their own FAQs. Cut it, drill it or fold it and the edge is the same steel as the face, bright for the first days after a fresh cut, then rusting in to match. Faux shows its sandwich at every cut edge, drill hole and fold, a thin coloured film sitting over bright aluminium or grey mild steel. Check the back face and the edges before you check the front, because the front is the one part designed to fool you. The sandwich at the edge is the tell, not the shine on the face.
Weight is the second physical tell. Steel weighs 7850 kilograms per cubic metre and aluminium weighs about 2700, so a 3mm corten panel runs about 23.6 kilograms per square metre while an aluminium panel of the same size runs roughly a third of that. Parasoleil markets its aluminium panels as less than half the weight, which is honest marketing and a free identification test at the same time. If one person can lift a full panel over their head without effort, you are not holding 3mm steel. Our thickness guide shows what each gauge of real corten weighs and where it belongs.
What a Scratch Does to Real Corten and to Faux
A scratch is the test no coating can pass. Key a line through a powder coat or a paint film and the damage is permanent, because the colour lives in a skin a fraction of a millimetre thick. On powder coated steel the exposed metal underneath rusts as ordinary porous rust and creeps sideways under the film, lifting more coating as it goes. Kanyana Engineering, which sells the alternatives, states both points on its own comparison page, that powder coat scratches through to the substrate while corten’s colour does not scratch off.
If a weathered steel panel is scratched, its patina will self-heal. SSAB, the mill that makes COR-TEN.
Real corten heals because the alloy runs through the whole sheet. A scratch exposes fresh weathering steel, the fresh steel rusts, and the new rust blends into the patina around it over the following weeks. No faux product can do this, because there is nothing under the skin that knows how to rust properly. It is the single clearest difference between a material and a picture of a material.
What the Runoff Under a Panel Tells You
Runoff is a timeline, and each product writes a different one. Real corten sheds its heaviest runoff early, while the patina is forming, and the staining fades as the layer tightens and matures. That is why our pieces go through the 4 week cure in our yard first, so the heavy runoff stage happens here and not on your paving. Zero runoff on its own proves nothing, because real corten sealed with a penetrating oil also runs clean, and sealing is what we recommend once an owner is happy with the colour. Read runoff as a pattern across a season instead. Runoff that stays just as heavy in year 3 as in month 1 points to unalloyed steel rusting continuously, though a permanently wet or sheltered face can keep even real corten washing longer than the guides say. Treat runoff as a supporting clue beside the other 5 tests, never as a verdict on its own.
One popular test proves nothing. Young real corten sheds loose surface rust too, so rubbing a cloth on new steel and finding colour on it condemns genuine steel and passes powder coat. Judge runoff across a season, not across a showroom visit. Our rust staining guide covers how runoff behaves on concrete and pavers and how detailing and sealing manage it.
Why the Magnet Test Cannot Prove Corten
A magnet sticks to mild steel exactly as hard as it sticks to corten. Both are ferromagnetic, so the magnet proves the panel is steel and nothing more. Websites publishing the magnet test as proof of real corten are publishing an error. One ranking guide, remodelormove, states the myth backwards in print, teaching that if a magnet sticks to the steel, it is not corten steel. The magnet has one honest use, elimination. If the magnet falls off, the panel is aluminium, plastic or composite, and the conversation is over.
Colour matching proves nothing either. The premium faux brands engineer their prints and powders from photographs of real rust, so a perfect colour match is what you are paying them for. The tap test, rapping a panel and judging the sound, has no technical source behind it anywhere. It is folklore. Trust the 6 tests run together, certificate, cut edge, scratch, runoff, weight and magnet, because no single test except the certificate settles the question alone.
How Long a Faux Finish Really Lasts Outside
The faux industry’s own documents give the finish a short life. Murobond’s data sheet for its rust paint says the clear coat needs recoating at 12 to 18 months in fully exposed applications, warns that the product leaches real rust that stains limestone, and states it is not recommended for metal surfaces outside. Porter’s specification for its rust system states the finish will continue to rust and that rust stains from runoff may appear on adjacent surfaces.
Dulux tells buyers its unsealed rust effect suffers rub-off and run-off, and that sealing it changes the appearance. The no staining claim in the advertising is contradicted by the fine print in the same companies’ technical documents.
Powder coat warranty terms are written the same way across the industry, and they decide what year 10 looks like. Dulux accepts measurable fading, up to delta E 5 on its colour scale, and set chalk ratings as outcomes inside warranty, not failures of it. On steel, its corrosion warranty drops to 5 years without the full primer system, and its premium ranges carry distance limits from the high tide line, down to 10 metres for one range. Every warranty also demands a documented cleaning regime and dies without it.
QUALICOAT, the powder coating industry’s own quality body, documents peeling and filiform corrosion, thin spider strands spreading under the film, appearing several years after installation. Lump Sculpture Studio also sells faux paint effects, and its warranty states those effects are not guaranteed against corrosion in coastal or chlorinated environments, with colour variance excluded as well.
Real corten runs on different physics. Tata Steel data published by the Steel Construction Institute puts weathering steel at about 2 microns of loss per year against about 50 microns per year for conventional steel in polluted air, because the alloyed rust layer adheres instead of flaking away. SSAB puts full oxidation at 2 to 6 years and service life at 40 to 100 plus years in moderate conditions when the steel is detailed properly. Drainage, exposure and site conditions still decide the outcome on any given piece, which is why we judge coastal sites case by case instead of printing promises.
What Real and Faux Cost Across 25 Years
Real corten costs more up front, and that is the honest starting point. Aluminium composite cladding, the panel family most corten look finishes are printed on, runs 55 to 120 dollars per square metre as supplied flat sheet. Our standard framed panel at 2260 by 1000mm starts at 395 dollars supplied, about 175 dollars per square metre, and that money buys a finished panel, framed, pre-weathered and ready to fix, not raw sheet. Both products still need posts and fixing, so installed totals depend on the site either way. Where real corten wins is every year after. It carries no mandatory recoating, no finish warranty clock and no finish to strip and replace, while every faux finish is a surface with a printed lifespan. At the retail shelf the gap nearly closes and the naming gets worse. A plastic screen at Bunnings costs 99 dollars, and a Jack screen sold under the name Weathering Steel costs 119 dollars, cheaper than several of the fake ones beside it. Its own product page describes 0.8mm plain steel that will keep weathering instead of settling into a fixed finish, which is the naming problem in a single shelf item.
| Product | Day one cost | Position at year 25 |
|---|---|---|
| Real corten panel, COR10, 2260 by 1000mm, framed and pre-weathered | From $395 supplied, about $175 per square metre | The same panel, no mandatory recoating, patina fully matured |
| Faux aluminium panel with corten print or powder coat | $180 to $300 per square metre installed | Panel sound, finish at or past its 10 to 25 year warranty, fading accepted inside warranty terms |
| Corten colour powder coat over steel | Near real corten money for professional coating | Shortest corrosion warranty in the field, 5 years on steel without the full primer system, one recoat or replacement likely |
| Rust effect paint, DIY | Cheapest day one, paint plus sealer | Still on the maker’s maintenance cycle, sealer recoats every 12 to 18 months in full exposure |
The loser across every horizon is powder coat over steel, which costs near real money and carries the shortest corrosion cover in the field. Our corten steel cost guide breaks down what the real material itself costs and why. The products this article covers are the ones we make from the real alloy, fence panels, gates, sculptures, 3D letters, 3D numbers, signage and parcel boxes.
When Faux Is Honestly the Right Choice
Faux wins wherever steel physically cannot go. Aluminium at about a third of the weight suits balconies, rooftops, boats and walls that cannot carry 23.6 kilograms per square metre. Faux also wins wherever rust runoff is unacceptable, which is why David Stringer Architects specified a corten look aluminium over a concrete facade in Queenstown, choosing zero leaching on purpose. Indoor features, heritage surfaces, rentals and short horizon fitouts all suit a finish that never rusts, never stains and shows its final colour on day one.
Named systems sold openly as coatings are legitimate products. UniCote LUX carries warranties up to 25 years and Interpon Sable CoreTen carries a 15 year global guarantee, and both are honest about being finishes. The problem was never the existence of faux. The problem is the word corten printed on unbranded copies with no grade, no certificate and no warranty behind it. Buy faux knowingly where faux belongs, and buy real steel where the piece has to outlast the building’s paint.
How Our Patina Got There in the First Place
Ask any seller one question, how did the patina get there. A print shop answers with a photograph file. A powder coater answers with an oven. A paint tin answers with a brush. Our answer takes 4 weeks. Every corten piece we sell goes through our natural seawater cure, seawater applied daily in direct sun for about 4 weeks, with no chemical accelerants. Those 4 weeks establish the protective layer and the golden colour. What the cure buys is the messy stage finished before delivery. The heavy runoff happens in our yard instead of on your paving, and the colour sits stable from the day the piece goes in. Full maturity still takes 2 to 6 years on site, the same timeline SSAB publishes for steel weathered from raw, and the colour keeps deepening across those years.
That process is the certificate a homeowner can actually see. The steel is WR350A, HW350A or CW300A, the design is approved by you before anything is cut, and the patina on delivery is the same patina the tests in this article describe, formed in our yard where you can ask about it. Faux cannot imitate a process, only a colour. When the colour is the whole product, you are buying a photograph. When the process is the product, you are buying steel.
Got a project in mind? Tell us what you want made, the rough size, and your suburb. We will tell you straight whether it suits corten and what it will cost.
Frequently Asked Questions
How can I tell if corten steel is real or fake?
Ask for the steel grade and the mill certificate, then check a cut edge for one material all the way through. Real weathering steel is the same alloy on both faces and at every edge. A magnet cannot tell you, because mild steel and corten are both magnetic.
Is generic weathering steel the same as COR-TEN?
COR-TEN is a trademark owned by US Steel and licensed to mills such as SSAB. Certified Australian grades, WR350A, HW350A and CW300A, are genuine weathering steels by specification, with the alloy content set by AS/NZS standards. The risk is not a generic grade, it is steel sold with no grade and no paperwork at all.
How long does real corten take to reach its full colour?
SSAB puts full oxidation at 2 to 6 years for steel weathering on site. Pieces from our workshop arrive with the patina already formed by the 4 week seawater cure, and the colour keeps maturing naturally after installation.
Will real corten stain my pavers?
Early runoff can mark porous surfaces while a patina settles, which is why our cure moves the heaviest runoff stage into our yard before delivery. Detailing, stand-off and sealing manage the rest, and our rust staining guide covers the full picture.
Can faux corten go near the sea?
Powder coat warranties restrict premium ranges by distance from the high tide line, down to 10 metres for one Dulux range, and aluminium pits in salt air over time. Our own coastal work is judged site by site, and over 75 percent of our sculptures and 3D products stand within 250 metres of the sea, arriving with the patina already formed.
What does corten style mean on a product listing?
It means a coating, a print or a paint that copies the colour of rust. Style, look and effect are the words sellers use when the product contains no weathering steel. If a listing will not name a steel grade, it is not corten.
Sources
- SSAB, weathering steel and COR-TEN, patina self-healing and full oxidation at 2 to 6 years, ssab.com
- BlueScope and NZ Steel, HW350 hot rolled weathering steel datasheet, alloy ranges for phosphorus, copper, chromium and nickel, nzsteel.co.nz (PDF)
- YardSteel Australia, disadvantages of corten steel, oxidised mild steel marketed as corten warning and certification as the fix, yardsteel.com.au
- Murobond, Rust Paint data sheet, recoating at 12 to 18 months and rust leaching warnings, murobond.com.au (PDF)
- Porter’s Paints, Instant Rust Clear Sealer specification, continued rusting and runoff staining stated in the maker’s own document, porterspaints.com (PDF)
- Dulux Powder and Industrial Coatings, Alumi Shield warranty solutions brochure, fade and chalk allowances, dglpowders.com (PDF)
- Dulux Powder and Industrial Coatings, Steel Shield warranty solutions brochure, 5 year corrosion cover on steel, pcsbeenleigh.com.au (PDF)
- Interpon Powder Coatings, CoreTen brochure, 15 year global guarantee, specifyinterpon.com.au (PDF)
- Metwood, technical information and warranties, sublimated corten finishes on aluminium, vulcan.co (PDF)
- Kanyana Engineering, corten steel vs alternatives, powder coat scratch and paint degradation stated in their own comparison, kanyanaengineering.com.au
- Entanglements, finish options, powder coat over aluminium only and coastal advice, entanglements.com.au
- Lump Sculpture Studio, FAQ and warranty terms, faux finishes excluded from coastal corrosion cover, lump.com.au/faq
- QUALICOAT UK and Ireland, avoiding architectural powder coat failures, peeling and filiform corrosion, qualicoatuki.org
- ACCC, advertising and selling guide, businesses must prove advertised claims, accc.gov.au
- Steel Construction Institute, weathering steel guidance, corrosion rates for weathering and conventional steel, steelconstruction.info
- EN 10204, metallic products types of inspection documents, the standard behind the 3.1 mill certificate
- ArchiPro Australia, aluminium composite cladding pricing, supply at 55 to 120 dollars per square metre and installed at 180 to 300 dollars, archipro.com.au
- Bunnings, Jack Matrix screen panel, recycled plastic screen at 99 dollars, bunnings.com.au
- Bunnings, Jack 1800 by 900mm Spirals Weathering Steel Screen product page, 119 dollars, described on the page as 0.8mm plain steel, bunnings.com.au
- RemodelOrMove, Can you keep Corten steel from rusting, the magnet test stated backwards in print, remodelormove.com
- Parasoleil, product components, aluminium panels at less than half the weight of steel, parasoleil.com
- Euroclad, UniCote LUX Corten Red, printed corten look finish on prepainted steel, euroclad.com.au
- Modinex, aluminium batten range, powder coat colour named CorTen, modinex.com.au
- EBOSS, Metwood corten look aluminium coverage, specified where rust leaching had to be avoided, eboss.co.nz