Byron Bay Corten Steel Fabricator | COR10 Steel
30 metal fabrication shops operate across Byron Bay and the Northern Rivers. Exactly 1 of them specialises in corten steel. We are that 1. We are COR10 Steel, a custom corten fabricator in Byron Bay, NSW. This article names who else fabricates in the region, explains why weathering steel needs a specialist, and gives you the questions that protect your money.
Which Fabrication Shops Work in Byron Bay and the Northern Rivers
3 metal fabrication shops operate in Byron Bay itself. Atlas Engineering on Ewingsdale Road builds structural steel and balustrades. Southern Cross Sheet Metal and Byron Metal Works handle general metal fabrication. None of the 3 lists corten or weathering steel as a material they work with.
Ballina holds the densest cluster in the region. Smiths Metal Fabrication, Elevation Gates, FJB Sheetmetal and Koellner Steel cover gates, fencing and structural work between them. Lismore has Soward Steel plus a dozen general shops serving the Northern Rivers. Murwillumbah and Tweed Heads add Phat Dab Customs and Munro Engineering Fabrication. Every one of these businesses works in aluminium, mild steel, stainless or powder-coated steel. Every one of them treats rust as the enemy. We are the only shop in the region whose product is rust, controlled.
That is what a review of public websites shows, conducted in October 2026. We checked about 30 fabricators across 8 towns and none advertised corten or weathering steel as a material. The closest corten range belongs to MetFab in Melbourne, which publishes no curing method. Lump Sculpture Studio in Melbourne publishes its process and its prices, and ships Australia wide, but it is a Melbourne studio rather than a local Byron Bay fabricator.
Why Corten Steel Needs Its Own Kind of Fabricator
Weathering steel behaves differently from every metal the general shops stock. WR350A, HW350A and CW300A are the Australian weathering grades we work with. WR350A is the structural grade under AS/NZS 3678, while HW350A and CW300A cover flat products under AS/NZS 1594 and 1595. Each grade suits different product forms and thicknesses, so the grade is matched to the job.
Welds need matching low alloy consumables, or the weld lines weather at a different rate and stay visible for years. Lump Sculpture Studio states the same rule for its own corten work. Cut edges need treatment, because a raw plasma edge rusts faster than the face around it. Most general fabricators have never needed to learn any of this. Their whole business is keeping rust off steel, through galvanising, powder coating or stainless. Ours is the reverse. Our 4 week seawater cure builds the patina before the piece leaves the yard, with seawater applied daily in direct sun and zero chemical accelerants. No other Australian fabricator we could find publishes a curing process at all. That difference is why a corten gate, sculpture or set of 3D letters should come from a shop that thinks in weathering steel, not a shop that tolerates it.
What Happens Between Your First Call and Installation Day
Every custom job follows the same 5 steps. Consultation starts with your measurements, site photos and budget range. Design turns that into a drawing you approve before anything is cut. Fabrication cuts, welds and finishes the steel in our Byron Bay workshop. Curing gives corten pieces their 4 week seawater bath. Delivery or installation finishes the job, Australia wide.
The approval before cutting matters most. It removes the fear of receiving something you did not picture, and every reputable custom shop works this way. Tell us your deadline at quote stage. The cure cannot be rushed without chemicals, and we do not use them, so timing gets planned around the 4 weeks from the start.
What Custom Steel Fabrication Costs in Australia
Published prices are rare in this trade. Almost every fabricator quotes job by job and publishes nothing. A Melbourne gate maker publishes pedestrian gates at 900 to 2500 dollars and driveway gates at 2250 to 6250 dollars, in galvanised and powder-coated steel rather than corten. Our sculptures start from 1750 dollars, our gates from 2750 dollars, and our fence panels from 395 dollars. Prices are in Australian dollars, and each quote confirms exactly what is included.
| Product | Our from price | Published market comparison |
|---|---|---|
| Custom sculpture | From $1,750 | $1,930 to $36,300, Lump Sculpture Studio, Melbourne, corten sculptures |
| Driveway gate | From $2,750 | $2,250 to $6,250, Melbourne Gates, galvanised and powder-coated steel, not corten |
| Fence panel | From $395 | $300 to $400 per metre, Melbourne Gates, galvanised steel panels |
| 3D letters and numbers | Quoted per job | No Australian publisher found |
COR10 requires a 50 percent deposit before work begins, with the balance due before delivery. Structural warranty on our sculptures runs 24 months to 5 years depending on the piece. Be wary of any quote far below the rest, because it usually hides thinner steel, rushed welds or no warranty at all.
Questions That Separate Good Fabricators From Risky Ones
Ask for photos of similar finished work, not renders. Ask whether fabrication and installation are handled by the same team, because being left with a gate and no installer is a common fear. Ask what welding consumables they use on weathering steel, and watch for a blank look. Ask for the lead time in writing and what happens if it slips. Ask about warranty length and exactly what it covers. Ask to visit the workshop, because a shop that says no is waving a red flag. Ask how they handle rust runoff near your paving, because any corten fabricator should have a straight answer instead of a shrug.
Our answer to the runoff question is the 4 week cure plus Penetrol sealing when you are happy with the look. The 4 week cure means the heaviest runoff happens in our yard, not on your paving. Light weathering can still occur after installation, which is normal for corten. One competitor claims corten cannot be sealed at all, which contradicts how penetrating oils have been used on rusted steel for decades. We publish our method so you can judge it yourself.
How Long Custom Corten Work Takes From Deposit to Delivery
A Melbourne gate maker quotes 3 to 4 weeks from deposit for its custom gates. Our sculptures take 12 to 14 weeks, and the difference is the cure plus the one-off design work. Raw corten pieces from most sellers arrive grey and need months on site to colour up. Ours arrive with the patina already formed from the 4 week cure, which is why the wait is longer and the result is better.
Corten has a record in this landscape that predates us. The 12 foot corten sculpture at the Lennox Head roundabout has stood in sea air for years, and Byron Shire Council backed corten as the preferred material for the Railway Park public art project in 2019. Weathering steel belongs here. It just needs a fabricator who understands it.
Got a project in mind? Tell us what you want made, the rough size, and your suburb. We will tell you straight whether it suits corten and what it will cost.
Frequently Asked Questions
Who fabricates custom steel in Byron Bay?
About 30 metal fabrication shops serve Byron Bay and the Northern Rivers. Among the fabricators whose public websites we reviewed in October 2026, COR10 Steel is the only one advertising a dedicated corten steel fabrication service.
What is the difference between a welder and a fabricator?
A welder joins metal. A fabricator manages the whole build, from design and cutting through welding to finishing. For a custom gate, fence or sculpture you need a fabricator.
Do I need drawings before contacting a fabricator?
No. Measurements, site photos and your budget range are enough to start. We turn that into a drawing for your approval before anything is cut.
How much does a custom corten gate cost in Australia?
Published conventional steel driveway gate prices run 2250 to 6250 dollars at a Melbourne maker. Our corten gates start from 2750 dollars. The final price depends on size, design complexity and automation.
How long does custom fabrication take?
A Melbourne gate maker quotes 3 to 4 weeks from deposit. Our sculptures take 12 to 14 weeks because of the 4 week cure and the one-off design work.
Do you deliver outside Byron Bay?
Yes, we deliver Australia wide. Every site is judged case by case, including coastal sites.
Sources
- MetFab Steel, corten steel fabrication Melbourne, pre-weathered range, metfab.com.au/corten-steel
- Lump Sculpture Studio, why we love corten steel, fabrication specs and pricing, lump.com.au
- Lump Sculpture Studio, delivery FAQ, Australia wide shipping, lump.com.au/faq
- Melbourne Gates, custom steel gates price guide and lead times, resurrection.com.au
- Atlas Engineering, steel fabrication Byron Bay, atlas-engineering.com.au
- NSW Government, The Rusty Plank corten sculpture Lennox Head, nsw.gov.au
- Byron Shire Council, Public Art Panel minutes 14 November 2019, corten steel as preferred material, byron.infocouncil.biz (PDF)
- Williamson Builds, fence height rules NSW, exempt development standards, October 2026, williamsonbuilds.com.au
- Metal Railings London, how to choose a metal gate fabricator, buyer checklist, metalrailingslondon.co.uk
- Big Easy Iron Works, custom metal fabrication process, bigeasyironworks.com