Corten Steel Grades Explained: A242 vs A588 vs A606

Corten steel plate with CNC-cut lettering

COR-TEN is a trade name, while A242, A588 and A606 Type 4 are ASTM specifications for weathering steels. The important differences are product form, thickness range, strength requirements and the jobs each specification is intended to handle.

A588 is the structural workhorse. A242 is another structural weathering-steel specification often encountered in plate and visible-steel work. A606 Type 4 is the sheet-and-strip specification for thinner formed products, cladding and similar work.

The key point: the grade number alone does not tell you whether a piece is suitable. Product form, thickness, detailing and the actual standard ordered matter just as much.

What do the grade names actually mean?

The letters and numbers come from ASTM International, which publishes material standards in the United States. Each specification describes a particular class of steel products. ASTM A242 covers high-strength low-alloy weathering steel shapes, plates and bars for welded, riveted or bolted construction. The current A242/A242M-24 scope covers material up to 4 inches (100 mm) thick. ASTM A588 covers high-strength low-alloy structural steel shapes, plates and bars with atmospheric corrosion resistance. It is widely associated with bridges, buildings and other load-bearing work. The current specification is A588/A588M-24. ASTM A606 Type 4 covers high-strength, low-alloy sheet and strip, supplied hot rolled or cold rolled. The current A606/A606M-25 specification covers cut lengths and coils with enhanced atmospheric-corrosion resistance compared with ordinary carbon steel. That product-form distinction is more useful to a buyer than memorising three numbers.

ASTM A588: the structural grade

A588 is the grade to think about when the steel itself is part of the structure. It is intended for structural members where the combination of strength and atmospheric-corrosion resistance can reduce weight or maintenance requirements. A588 Grade A is commonly specified with a 50 ksi (345 MPa) minimum yield strength within its applicable thickness range, with the exact mechanical requirements depending on product and thickness. Current SSAB product data lists 50 ksi minimum yield for its listed A588 Grade A plate range. Typical applications:

  • Bridge components
  • Structural frames
  • Towers
  • Heavy support members
  • Other applications carrying meaningful loads

For garden products, however, A588 can be more steel than the job actually needs. A decorative screen does not become better simply because you used a structural weathering grade. The section still has to be thick enough, properly supported and correctly detailed.

ASTM A242: the other weathering-steel plate and shape grade

A242 is an important part of the weathering-steel family, but it should not be described simply as “the architecture grade.” The ASTM specification itself is for high-strength low-alloy structural steel shapes, plates and bars. Its current scope reaches up to 4 inches (100 mm) in thickness. In practice, A242 is often encountered in thinner weathering-steel plate and architectural work because visible-steel applications can use it for:

  • Screens
  • Facades
  • Cladding components
  • Signage
  • Public art
  • Decorative steelwork

The distinction is not “A242 is decorative and A588 is structural.” Both are structural weathering-steel specifications. The real differences include detailed chemistry, product requirements and thickness-dependent mechanical properties.

ASTM A606 Type 4: the sheet and strip grade

A606 Type 4 is where the product form changes significantly. ASTM A606/A606M-25 covers hot-rolled and cold-rolled sheet and strip, supplied in cut lengths or coils. Hot-rolled material below 0.230 inch (6.0 mm) is covered as sheet and strip, while thicker hot-rolled material can be supplied as coil. That makes A606 Type 4 particularly relevant where steel needs to be thin, formed or fabricated from sheet and coil. Typical applications:

  • Roofing
  • Wall cladding
  • Folded panels
  • Formed components
  • Containers
  • Some planter and garden products

SSAB current A606 Type 4 coil data lists 50 ksi (345 MPa) minimum yield strength for its listed coil product. Actual availability depends on the mill and ordered product. A606 Type 4 is not simply “weaker Corten.” It is a different product form designed around sheet and strip applications.

A242 vs A588 vs A606: side by side

Feature A588 A242 A606 Type 4
ASTM product type Shapes, plates, bars Shapes, plates, bars Sheet and strip
Main role Structural weathering steel Structural weathering steel; often encountered in lighter/visible work Thin sheet/strip weathering steel
Typical applications Bridges, frames, towers, heavy structures Architectural steel, platework, visible steel, structural members Roofing, cladding, formed panels, sheet products
Strength Thickness and product dependent; 50 ksi is common in relevant sections Thickness and product dependent Current SSAB Type 4 coil data lists 50 ksi minimum yield
Scope / thickness Thickness-dependent requirements ASTM scope up to 4 in (100 mm) Sheet/strip specification; hot-rolled scope changes at 6 mm
Best buying question What structural grade and thickness? What plate grade and thickness? What sheet grade, thickness and forming requirement?

Does the strongest grade make the best garden product?

This is one of the biggest mistakes buyers make. For a garden screen, planter, sculpture or decorative panel, the question is usually not “Which grade has the highest yield strength?” A properly detailed weathering-steel product at an appropriate thickness can be a better choice than an unnecessarily heavy structural grade. The better questions are:

  • How thick is the steel?
  • How is it supported?
  • Can water drain away?
  • Will mixed metals be isolated properly?
  • Will the surface be able to dry between wet periods?
  • Is the product actually being supplied to a recognised weathering-steel specification?

Do not treat the three grades as interchangeable just because they can all develop a weathering patina. ASTM defines different product forms and requirements for each specification.

What the Australian grade names mean

Australian buyers may not see A242 or A588 on a quote at all. BlueScope current REDCOR weathering-steel products include Australian-standard designations such as:

  • CW300A under AS/NZS 1595 for cold-rolled sheet
  • HW350A under AS/NZS 1594 for hot-rolled products
  • WR350A under AS/NZS 3678 for plate
  • WR350B under AS/NZS 3678 for thicker plate and structural applications

BlueScope lists CW300A at approximately 0.7-2 mm, HW350A at 3-10 mm, WR350A at 8-12 mm and WR350B at 10-80 mm in its published product range. These are specific Australian products, not universal thickness limits for every mill. That is why a quote simply saying “Corten steel” is incomplete. Ask what the actual material standard is.

What COR10 uses for 3D numbers and sculptures

For 3D numbers and outdoor sculptures in Australia, we use high-phosphorus weathering steel, specifically Grade WR350A (under Australian Standard AS/NZS 3678) or Grade HW350A / CW300A (under AS/NZS 1594 / 1595). They are the direct domestic equivalent to the globally recognized trade name CORTEN.

HW350A grade weathering steel is cut before the welding process. Our CW300A steel arrives raw and goes through the 4-week curing process.

CW300A grade steel after 4 week curing process.
CW300A grade steel after 4 week curing process.

What about COR-TEN A and COR-TEN B?

COR-TEN® is a trade name, not the name of one universal ASTM specification. Central Steel Service describes COR-TEN A as broadly corresponding to A242 and COR-TEN B as broadly corresponding to A588 Grade A, while noting relationships with A606 Type 4. That is useful trade guidance, but the names should not be treated as interchangeable material certificates. SSAB likewise lists COR-TEN® products against multiple international standards, including ASTM and EN designations. Never buy on the word “Corten” alone. Buy on the material specification.

The quality number most buyers never hear about

Weathering-steel performance is not judged only by how rusty the steel looks. ASTM Guide G101 provides methods for estimating atmospheric corrosion resistance for low-alloy weathering steels, including A242, A588 and A606 Type 4. Central Steel Service notes that ASTM strengthened its weathering-steel specifications in 1997 by introducing a minimum Atmospheric Corrosion Index of 6.0 and reports that COR-TEN products typically carry a nominal value around 8.0. The practical lesson is not to memorise the number. It is to ask for the mill certificate. A current material certificate tells you what was actually supplied rather than relying on a salesperson simply calling something “Corten.”

Does the grade change the rust colour?

Not in the simple way people expect. All of these are weathering-steel specifications designed to form a protective atmospheric oxide layer under suitable exposure conditions. Final colour depends heavily on:

  • Climate
  • Moisture
  • Wet-and-dry cycles
  • Orientation
  • Pollution
  • Age
  • Drainage
  • Surface condition

Two pieces made from different weathering grades can end up looking very similar, while two pieces made from the same grade can weather differently in different locations. The grade is not a colour code.

Which grade do you need for garden work?

For most garden and landscape products, start with the product form and thickness, not the grade number. For thin folded products and sheet-based fabrication, an appropriate weathering sheet or strip specification such as A606 Type 4 may be relevant. For plate-based architectural work, screens and visible steelwork, A242-type plate products may be encountered. For genuinely load-bearing structures, A588 or an appropriate Australian structural weathering grade may be more relevant. In Australia, the material may be specified under AS/NZS standards such as CW300A, HW350A, WR350A or WR350B rather than ASTM. There is no prize for choosing the most expensive grade. Choose the specification that matches the form, thickness, loads, fabrication and environment.

See our 3D numbers for an example of Australian-grade weathering steel made for outdoor display.

3D numbers and outdoor sculptures in Australia.
3D numbers and outdoor sculptures in Australia.

What matters more than the grade

A poor design can defeat a good weathering steel. Weathering steel performs best when it can experience suitable wet-and-dry cycles and when details allow water to drain rather than remain trapped. Crevices, standing water, poor drainage and severe chloride exposure can cause problems regardless of what the certificate says. That is why two pieces made from the same weathering grade can have very different service lives.

What to ask your fabricator

You do not need to memorise ASTM numbers. Ask three simple questions:

  • What exact grade and standard is the steel?
  • What thickness are you using, and why is it appropriate for the job?
  • How are drainage, fixings and dissimilar metals being handled?

Then ask for the mill certificate. A proper fabricator should be able to answer clearly.

Frequently asked questions

Is A606 the same as Corten?

No. A606 Type 4 is an ASTM specification for weathering sheet and strip. COR-TEN® is a trade name. Central Steel Service describes COR-TEN A and B as broadly corresponding to other ASTM weathering grades, but the names should not be treated as interchangeable specifications.

Which is stronger, A242 or A588?

Neither can be compared from the name alone. Both are structural weathering-steel specifications, and their mechanical requirements depend on product form, grade and thickness. A588 is more commonly associated with heavier structural applications, while A242 is also used in plate and shape applications where atmospheric durability is required.

Can I use A606 Type 4 for structural work?

A606 Type 4 is a sheet and strip specification, so it should not automatically be substituted for a structural plate or shape grade simply because the steel has similar weathering behaviour. Structural loads, section thickness and engineering requirements determine the correct material.

What is the Australian equivalent of A588?

There is no single one-line equivalence for every product. Australian weathering steels are commonly supplied under AS/NZS specifications such as WR350 and HW350, depending on product form. Check the actual mill grade and certificate.

Does weathering steel always reach a protective patina?

Weathering steel is designed to develop a protective atmospheric oxide layer, but the environment matters. Drainage, wet-and-dry exposure, humidity, pollutants and chlorides all affect how the patina develops.

Can stainless fixings be used with weathering steel?

They can be used, but mixed-metal contact should be designed carefully because galvanic corrosion can occur in wet conditions. The exact fixing material and isolation method should suit the exposure and detail.

Does A606 Type 4 rust the same way as A588?

They are both weathering-steel specifications designed for enhanced atmospheric corrosion resistance, but they are different product specifications. The visual result is influenced by exposure conditions as much as by the grade itself.

The simple answer

A588 is the structural choice. A242 is another structural weathering-steel specification commonly encountered in plate and architectural work. A606 Type 4 is the sheet-and-strip choice.

For a real project, the better question is not “Which Corten grade is strongest?” It is: Which weathering-steel specification, thickness and product form actually fit this job?

Talk to COR10 about your project

If you are planning 3D numbers, letters, signage or a landscape sculpture, tell us about the site and the look you want. We will match the right Australian weathering-steel grade, thickness and finish to the job.

Technical references

ASTM International, A242/A242M-24 – High-Strength Low-Alloy Structural Steel. Covers shapes, plates and bars and limits the specification to material up to 4 in (100 mm) thick. View the A242 standard

ASTM International, A588/A588M-24 – High-Strength Low-Alloy Structural Steel with Atmospheric Corrosion Resistance. View the A588 standard

ASTM International, A606/A606M-25 – Weathering sheet and strip specification for hot- and cold-rolled products. View the A606 standard

ASTM International, G101-04R25 – Guide for estimating atmospheric corrosion resistance of low-alloy weathering steels. View the G101 guide

SSAB – Current ASTM A242, A588 Grade A and A606 Type 4 product information. SSAB COR-TEN product page

BlueScope – Current REDCOR weathering-steel Australian grades and product ranges. BlueScope REDCOR range

Central Steel Service – Weathering-steel FAQ covering COR-TEN trade-name relationships and Atmospheric Corrosion Index information. Central Steel Service FAQ

Similar Posts