How Much Does a Corten Steel Business Sign Cost?
A corten steel business sign costs $497 to $897 plus $100 flat rate shipping for a published 3mm flat panel from Farm Signs Australia. Our own 3D letters run $645 to $1,295 across the listed sizes, and our custom signage work includes our own 3D signs at $850 to $5,000 by size. A fabricated shopfront sign costs far more, with Printflex putting mid size shopfront channel letters at $2,500 to $8,000 supplied and installed and Sign Gallery stating that most professional shopfronts start from $3,000.
Monument style signs run $2,500 to $15,000 at Signage 4 Business Group and $5,000 to $20,000 at National Corporate Signage, and lighting adds to the price on top of the sign itself. Every figure in this guide is in Australian dollars unless the line names US dollars.
This guide walks through the price by sign type, the seven things that move it, and the honest gap between corten and the cheaper materials. It also covers what a proper quote should itemise and how council approval works for a business sign in New South Wales.
What a corten business sign costs by type
Pricing a corten sign for your business. Send the business name, a rough size and a photo of the wall through our quote page and we will price the job properly. Or start with the custom signage work itself and come back to the numbers below with a design in mind.
A modelled corten shopfront range, with the assumptions in the open
No published band answers the exact question in the title, because the published corten prices are panel prices and the published shopfront prices are not corten specific. So here is a modelled range for a corten shopfront, built only from the figures on this page and labelled as a model from the first line. It is not a quote, it is not a COR10 signage price.
The panel route comes first. Farm Signs Australia prices its 1100 by 700mm classic panel at $697 and its statement panel at the same size at $897, and that panel covers 0.77 square metres. Scaling by area to a 2000 by 500mm shopfront panel at 1 square metre gives a modelled panel price of $905 to $1,165, and the scaling assumption is that price follows steel area, which real cutting time and letter count do not do in a straight line. Add the $100 flat rate shipping Farm Signs publishes, two packs of four stand offs at $38.50 a pack for $77, artwork at $44 including GST where finished files cannot be supplied, and local fitting on the Airtasker typical range of $215 to $562. The modelled total for a fitted 2000 by 500mm corten panel sign is $1,341 to $1,948 with artwork, and $44 less where finished files are supplied. At the published 1100 by 700mm size, the same route totals $1,050.50 to $1,397.50, built from the $697 classic panel, the $100 flat rate shipping, one pack of four stand offs at $38.50 and local fitting at $215 to $562.
The 3D letters route is simpler arithmetic on our own published range. Each letter is sold individually on the 3D Letters product page at $645 to $1,295 depending on size, so a business name is priced letter by letter. Our 3D letters run $645 to $1,295 per letter across the listed sizes of 50, 100 and 150 by 35 by 35 centimetres, with fixing rods supplied and delivery priced by custom quote on the product page. A 6 letter business name works out at $3,870 to $7,770 on that range, and an 8 letter name works out at $5,160 to $10,360. That arithmetic buys the letters only, and it is not a signage quote, because a full signage job adds backing, freight, fitting and approvals where they apply. It does show where a corten letter name lands before those extras, and the 6 letter spread sits inside the generic Printflex shopfront band in the chart above.
A worked example from the published figures
Here is a worked example built line by line from the prices above, and it is a model, not a quote and not our price.
A small cafe shopfront in letters. The main line is the Printflex band of $2,500 to $8,000 for mid size shopfront channel letters supplied and installed. Artwork adds $44 including GST where the buyer cannot supply finished files, on the Signosaur simple layout fee of $40 plus GST, and custom design work at $80 plus GST per hour sits outside the total because the hours vary by job. No separate fitting line appears, because fitting already sits inside the Printflex band, and Sign Gallery putting most professional shopfronts from $3,000 cross checks the low end. The modelled total is $2,544 to $8,044 where artwork is needed and $2,500 to $8,000 where finished files are supplied. Council approval costs sit outside this example in the council section below.
Why fabricated shopfront signs have no per letter price list
Buyers ask for a per letter price on a fabricated shopfront sign because acrylic and aluminium letters are sold that way online. BannerBuzz Australia starts acrylic letters at $20.48 and aluminium letters at $50.03, and those are starting prices for the smallest online sizes. A fabricated shopfront sign is not stocked as a letter blank in set sizes, so every Australian corten fabricator we checked quotes that work job by job instead.
Our local check found the same pattern closer to home. None of the 13 Northern Rivers sign companies we checked publishes a price, they all quote the job, and only Armsign mentions weathering steel at all, across its frames and structures work and its entry signage. That silence is the market telling you the truth, because corten signage is priced on drawings, weight and fixing, not off a shelf. A business name at readable shopfront size is a fabrication job, not a multiple of a smallest letter starting price.
The seven things that move a corten sign price
Size and letter count
Every extra letter is extra cutting, extra finishing and extra fixing points. GW Steel Traders in Sydney publishes corten strip prices that work out near $134 per square metre against mild steel near $66 per square metre, and its own FAQ says mild steel runs around half the price of corten. A blank panel at 1000 by 500mm holds roughly $67 of raw corten, so the steel itself is rarely the big line on a sign quote. Fabrication time is where the money goes, and size feeds fabrication time on every edge and every letter.
Thickness and weight
Thickness sets both the look and the handling bill. Steel at 3mm weighs 23.55 kilograms per square metre, and a solid panel at 1100 by 700mm weighs about 18.1 kilograms before any letters are cut out of it. Laser cutting removes weight and frames and folds add some back, but a corten shopfront sign stays a two person lift that needs structural fixing. Our guide to corten steel thickness walks through what each gauge suits, and our 3D letters and numbers are built in 3mm.
Finish and the cure
A sign can leave a workshop raw or pre weathered, and the two arrivals look nothing alike. Raw steel starts grey and colours up on your wall, and Farm Signs Australia puts rust runoff at its heaviest in the first 6 to 12 months on its 3mm signs before it eases once the patina settles. Our letters and numbers arrive already weathered, because we cure each one in natural seawater for about 4 weeks in direct sun so the patina is formed before it reaches your wall. We use no chemicals to speed that cure up, and the seawater process is the reason a pre weathered piece costs more workshop time than a raw one.
Backing and mounting
Letters need something to sit on and something to hold them off the wall. Slimline Warehouse sells a stand off pack of 4 for $38.50 including screws and anchors, and that small figure covers simple flat mounting only. US like for like pricing from The Sign Chef shows raceway mounting adding $541.21 US dollars to its front lit 10 letter set, taking that set from $2,162.97 to $2,704.18, and wireway mounting adding $656.23 US dollars to its reverse lit set. Our 3D letters ship with fixing rods supplied for installation, and a custom signage quote should name its backing and fixings just as plainly.
Design and artwork
Clean artwork files keep this line small and messy files grow it. Signosaur includes basic artwork and 3 proofs free once an order is paid and the customer completes the design brief, then charges from $40 plus GST for a simple layout and $80 plus GST per hour for custom graphic design. Russell Sign and Print puts artwork fixes at $40 to $80 plus GST or $80 per hour plus GST. A logo that needs redrawing for cutting is real design work, and honest quotes charge for it in the open.
Lighting and electrical work
Lighting lifts a letter price harder than any other single extra. The Sign Chef figures show front lit letters adding 32 percent and reverse lit letters adding 69 percent to the same set of letters. NSW Fair Trading requires all electrical wiring work to be done by, or under the supervision of, a licensed electrician regardless of the job cost, and commercial electrician guides put the rate at $100 to $140 per hour with a $150 to $250 call out that includes the first hour. An outdoor weatherproof power point runs $280 to $450 installed, and none of that electrical spend goes to the sign maker.
Freight and installation
Heavy steel travels on a pallet and pallets are priced by the lane. 360 Operations Group publishes standard pallet rates of $207.40 from Sydney to Melbourne and $213.50 from Sydney to Brisbane before GST, and Hot Cut in South Australia charges $100 to $150 to deliver a palletised sign at 240 by 120 centimetres to most places, with remote locations running up to $500. Installation only work on Airtasker Australia runs $215 to $562 as a typical range, and ProGroup Signs says labour and installation add 30 to 50 percent on top of materials across its sign work. Height access adds more again when a scissor lift is needed, and Auslift hires a 19 foot scissor lift at $149.16 a day including GST and a 26 foot unit at $211.31 a day including GST. A tall freestanding sign can add one line that wall signs never see, because Armsign states that structures over 2400mm in height generally require an engineering certificate, and a Sostron pricing guide puts structural engineering and certification for large freestanding signs at $2,000 to $8,000 on top of the sign itself.
Corten against acrylic, aluminium and the corten look
Cheaper sign materials win the purchase price and lose on replacement. ProGroup Signs publishes material rates of $80 to $300 per square metre for aluminium composite panel with a 10 to 20 year life, $150 to $800 per square metre for acrylic with a 5 to 10 year life and $20 to $60 per square metre for PVC foam with a 1 to 3 year outdoor life. Paperlust in Melbourne sells a supply only aluminium composite panel at $139 including GST for 600 by 900mm and $421 including GST for 1200 by 2400mm, with hardware and delivery extra.
The corten look without corten steel is its own trap. Aussie Clotheslines sells a corten powder coated aluminium faceplate at $578, and the name tells you the steel underneath is aluminium with a rust coloured coat. Rust effect paints ask for recoating every 12 months on the guidance for the Porter’s Paints rust effect clear sealer, and the Murobond rust paint data sheet puts recoating at 12 to 18 months in full exposure and does not recommend the product for metal surfaces outside. Our guide to real versus faux corten steel shows how to tell a genuine weathering steel sign from a coated lookalike before you pay.
What your corten sign quote should include
Itemised quotes are the norm in the Australian sign trade, and MTM Signage states that every quote it issues is detailed and itemised. SignPermit runs the only Australian consumer cost calculator we found, and its model separates just three parts, being the sign supply, the installation and the council permit fees. A good corten quote goes further than any calculator, and the eight checks below catch the lines that calculators and cheap quotes leave out.
The steel named in writing. The quote should state the weathering steel grade by name and the thickness in millimetres, because unnamed steel can be mild steel that rusts without ever forming a protective layer. Our corten steel grades guide explains the Australian grades and their overseas equivalents.
The finish state on arrival. The quote should say whether the sign arrives pre weathered or raw, because that one line decides your runoff risk and your opening day look. Raw steel colours up on the wall over the following months, while a cured piece arrives with its patina already formed.
Backing and fixings. The quote should list the backing plate or rails, the stand offs or rods and the template, or state plainly that the sign is supply only with none of them. Hardware looks cheap as a line item and gets expensive as a surprise.
Design and proof approval. The quote should state the artwork charges and the proof process, because no production starts before written proof approval in standard trade practice. Check every letter of your business name on that proof, because the customer carries spelling errors they approved.
Delivery to your address. The quote should price freight to your postcode or name it as excluded, because pallet freight on a steel sign runs into hundreds of dollars on the published lane rates above. A Byron Bay pickup and an interstate pallet are different products at the checkout.
Installation and electrical connection. The quote should say whether fitting is included, and electrical connection is commonly excluded unless it is stated. If the sign is lit, the licensed electrician is a separate cost that belongs in your budget from day one.
Fees, GST, validity and deposit terms. The quote should state council fees, GST treatment, how long the price holds and what deposit starts the job. General Australian trade practice across six published sign firm terms runs at a 50 percent deposit before work with the balance on completion or delivery, and quote validity of 15 to 30 days is common. Those are trade patterns to ask about, and your maker’s own terms are the ones that bind you.
Warranty in writing. The quote should state the warranty period and what it covers across materials, workmanship and any electrical components, and it should state it in writing. Maker warranties we checked run from 1 year on materials and workmanship to 3 years covering the sign and its electrics, and on a lit sign that gap is real money.
Council approval for a business sign in New South Wales
Many business signs in New South Wales need no application at all when they meet the exempt development rules. A business identification sign may show the business name, the nature of the business, the street address and a logo, and it must carry no third party advertising. The exempt path needs written landowner consent, Roads Act approval if the sign projects over a public road or footpath, and secure fixing in accordance with Australian Standards. The caps allow 3 signs for a single tenant building and 6 signs in total per building, with 1 sign for a home business in a residential zone.
Size limits apply inside the exempt path. A building identification sign caps at 2.5 square metres placed flat against the building with 1 sign per frontage, and an under awning sign caps at 1.5 square metres and 2.5 metres long with 2.6 metres of clearance. Window signs cap at 20 percent of the window or 6 square metres, whichever is smaller, and cannot be illuminated on the exempt path, and a fascia sign must fit wholly within the fascia and stay unlit.
Illuminated signs carry extra exempt conditions. Cables must hide inside the frame, the sign cannot animate, move or flash, and outdoor lighting must meet the Australian Standard. An illuminated sign on or within 50 metres of a residential, rural or environmental protection zone runs only during approved hours, and the default is 7am to 10pm when no hours are specified.
Heritage changes the path completely. Building identification signs and wall signs cannot use the exempt path on a heritage item or inside a heritage conservation area, and that work needs a development application instead. Byron Shire Council Development Control Plan Chapter B10 applies when consent is needed, and it sets a business identification display area of 1.5 square metres with a maximum of 3 signs per commercial or industrial premise. Council may also require a heritage impact statement for a sign on a heritage item.
Byron Shire gets its own paragraph here because we sell 3D letters in this shire. Chapter B10 does not apply to signage that is exempt development, and B10.1.3 of the plan says so in terms. A sign that does need consent faces B10.3.8, headed Signage Inappropriate, which states that the following signs are inappropriate and will not be supported by Council, and item (l) in that list is 3-Dimensional signs. That is not a ban, and the chapter does not decide exempt signs at all. It does mean a dimensional sign that needs consent in Byron Shire starts against a written council position, so early advice from Council comes before money spent on fabrication, not after. We raise it here rather than hiding it, because a buyer planning a dimensional sign in Byron needs to know it before they order.
Fees stay modest next to the sign itself. There is no single flat fee for a sign development application, and Schedule 4 of the Environmental Planning and Assessment Regulation 2021 sets the statewide maximum fees instead. A general development application with an estimated cost up to $5,000 sits at $153 in the 2026/27 schedule. A development application for one advertisement sits at $395 in that schedule where it exceeds the general fee, with $93 charged for each additional advertisement. SignPermit estimates a standard shopfront complying development certificate at $150 to $800, and we label that figure an estimate from a commercial guide rather than an official fee.
Approval time belongs in the budget conversation too. The Environmental Planning and Assessment Regulation 2021 gives a complying development certificate application a determination window of 10 days, or 20 days where the notification class in the Regulation applies. A standard development application carries a 40 day assessment period under the same Regulation, after which the application is taken to have been refused, and New South Wales Planning puts the average determination time for a development application at 70 days. SignPermit puts complex or heritage applications at 3 to 6 months, and it lists the standard application documents as a completed application form, a site plan, elevation drawings with dimensions, a sign specification sheet and a landlord consent letter where the applicant is a tenant, with New South Wales applications also needing a statement of environmental effects. A business with a fixed opening date should lodge before it orders the sign, not after.
Skipping the approval is the most expensive option on this page. Carrying out development without a required consent is an offence under the Environmental Planning and Assessment Act 1979, and the maximum penalty in the usual case is $2 million for a corporation and $500,000 for an individual, with further daily penalties of $20,000 and $5,000 while the offence continues. Higher Tier 1 maximums of $5 million and $1 million apply only where the prosecution proves the offence was intentional and caused or risked significant harm, death or serious injury. SignPermit adds that councils can issue removal orders at the owner cost, and an unapproved sign can put commercial insurance cover at risk.
What you get from COR10 in Byron Bay
Our signage page describes the work plainly as custom signage that suits commercial signage, property identification and custom landscape designs with a durable Cor-Ten steel finish. The page asks you to contact us to discuss your specific signage requirements, including custom designs, dimensions and finishes, and it publishes no price because the work is custom.
Our own 3D signs carry prices of their own, and the price depends on the size and the content of the sign. A COR10 3D sign runs $850 to $5,000 across the range. At 1 metre high by 350 by 350 millimetres the price is $850, and at 1.5 metres high by 400 by 350 millimetres the price is $1,285. A customised sign at 2.2 by 1.2 metres is from $3,950.
The published COR10 facts sit in the letter range. Our 3D letters run $645 to $1,295, they come in sizes of 50, 100 and 150 by 35 by 35 centimetres, and they are made in 3mm Cor-Ten steel or powder coated aluminium with rusted steel, powder coated and silver finishes. Fixing rods come supplied for installation, and delivery is priced by custom quote for each order.
We work in the Australian high phosphorus weathering steel grades WR350A, HW350A and CW300A, the domestic equivalents of the CORTEN trade name. Our letters and numbers go through our seawater cure here in Byron Bay, with seawater applied daily in direct sun for about 4 weeks and no chemical accelerants at any step. That cure forms the protective patina before delivery, so the piece weathers evenly after installation and keeps maturing naturally on the wall.
Ready to price your sign properly. Send us your business name, the wall or site it sits on, a rough size and a photo through our quote page, and we will come back with a custom quote in 24 hours on the promise stated on that page. Browse the custom signage range for the work itself, or price a letter based option against our 3D letters at $645 to $1,295. Australia wide delivery is available, and every quote starts with a no obligation conversation about your site.
Frequently asked questions
How much does a corten steel business sign cost for a cafe shopfront?
Budget $2,500 to $8,000 for fabricated shopfront letters supplied and installed on the Printflex bands, and expect a basic professional shopfront from $3,000 on the Sign Gallery figure. Square Australia puts brand design at $1,000 to $5,000 and signage installation at another $1,000 to $5,000 for a cafe under its branding, signage and exterior design heading, while a Sydney cafe fitout guide budgets signage alone at $2,000 to $15,000. A flat corten panel sits at the low end of that spread, and structure, lighting and approvals push a project up it.
Is a corten steel sign more expensive than aluminium or acrylic?
Yes at purchase, and the gap narrows across the life of the sign. ProGroup Signs rates aluminium composite at $80 to $300 per square metre with a 10 to 20 year life and acrylic at $150 to $800 per square metre with a 5 to 10 year life, while SSAB puts its weathering steel at 40 to 100 plus years in C3 conditions when it is applied properly, with practically zero maintenance. Online letter sellers start acrylic letters at $20.48 and aluminium letters at $50.03 at BannerBuzz Australia, and those starting prices buy the smallest sizes only.
Does the price of a business sign include installation?
Often it does not, and the quote should say so in plain words. ProGroup Signs adds labour and installation at 30 to 50 percent on top of materials, installation only work on Airtasker Australia runs $215 to $562 as a typical range, and Square Australia budgets signage installation at $1,000 to $5,000 for a cafe. Ask whether your price ends at delivery or at a fixed sign on the wall.
Do I need council approval for a business sign in New South Wales?
Many shopfront signs qualify as exempt development when they meet the size, fixing and content rules in the New South Wales advertising and signage provisions. The exempt path needs written landowner consent, and a building identification sign caps at 2.5 square metres with 1 sign per frontage. A sign on a heritage item or inside a heritage conservation area cannot use the exempt path and needs a development application. Check your site against the New South Wales Planning Portal advertising and signage page before you order.
How long does a corten steel business sign last?
SSAB puts the service life of its weathering steel at 40 to 100 plus years in C3 conditions when the steel is applied properly, comparable to coated carbon steel. The dense oxide layer protects itself and SSAB describes the maintenance need as practically zero. Drainage still matters, because water must run off the surface freely and never sit on the steel.
Will a corten steel sign stain my shopfront wall or paving?
It can in the early months, and planning for runoff beats cleaning it up later. Farm Signs Australia puts runoff at its heaviest in the first 6 to 12 months on its 3mm signs, easing greatly once the patina settles. Our letters and numbers arrive with the patina already formed by the 4 week seawater cure, which removes the grey waiting period at the wall. For any sign over light render or pale paving, ask the maker about backing, stand off distance and sealing before you order.
Can a corten steel business sign be lit?
Lit corten letters exist on the market, and lighting is the biggest single extra on a letter set. The Sign Chef pricing on the same 10 letter set shows front lit letters adding 32 percent and reverse lit letters adding 69 percent over the unlit set. Any lit sign in New South Wales needs its electrical connection done by, or under the supervision of, a licensed electrician. Ask any maker directly whether lit corten work sits inside their range before you design around it, because that answer changes the design and the budget from the start.
Is a business sign tax deductible in Australia?
It can be, and the treatment depends on the sign and the business. Australian sign guidance from The Factory sets out that the Australian Taxation Office includes signage under advertising and marketing, so design, production and installation costs can be claimed as business expenses, and a sign can also sit as a depreciable asset spread over its effective life. Which path applies changes the real cost of a shopfront job across the year. We are sign makers, not tax advisers, so check your own position with a qualified tax professional before you rely on either path.
Sources
All prices checked on 21 October 2026.
- Farm Signs Australia. Corten steel signs and property name sign pricing, 3mm panels at $497 to $897, with $100 flat rate shipping stated on the product pages. farmsignsaus.com.au and the property name sign page
- Printflex. 3D illuminated signs guide, shopfront letter bands from $800 to $30,000 and above. printflex.com.au
- Sign Gallery. 3D illuminated letter signs in Melbourne, most professional shopfronts from $3,000 and architectural projects above $10,000. signgallery.com.au
- ProGroup Signs. Sign material guide and retail signage guide, per square metre rates, package bands and the cost per year example. progroupsigns.com.au and the retail signage guide
- MTM Signage. Shopfront installations with professional fitting from $1,000 upward and itemised quote practice. mtmsignage.com
- Paperlust Print Shop. Aluminium composite signage panels at $139 and $421 including GST, supply only. printshop.paperlust.co
- Localsearch. Shop sign cost guide, cut sheet metal storefront signs at $1,500 to $3,000 per side, and the business sign cost guide for monument and pylon bands. localsearch.com.au
- Signage 4 Business Group. Monument and pylon sign bands, monument signs at $2,500 to $15,000. signage4businessgroup.com.au
- National Corporate Signage. Signage cost statistics, monument signs at $5,000 to $20,000 and channel letters at $3,000 to $30,000. nationalcorporatesignage.com.au
- The Sign Chef. Lighted 3D channel letter pricing, the same 10 letter set at $1,636.08 unlit, $2,162.97 front lit and $2,772.26 reverse lit, with raceway mounting at $2,704.18 and wireway mounting at $3,428.49. thesignchef.com
- Square Australia. Cafe setup costs, brand design at $1,000 to $5,000, signage installation at $1,000 to $5,000 under its branding, signage and exterior design heading. squareup.com
- GW Steel Traders. Corten strip pricing near $134 per square metre against mild steel near $66 per square metre. gwsteeltraders.com.au
- Signosaur. SignoDraw design service, simple layout from $40 plus GST and custom graphic design at $80 plus GST per hour. signosaur.com.au
- Slimline Warehouse. Satin silver stand off supports, a pack of 4 at $38.50 including screws and anchors. slimlinewarehouse.com.au
- 360 Operations Group. Pallet delivery cost page, Sydney to Melbourne at $207.40 and Sydney to Brisbane at $213.50 before GST. 360operationsgroup.com.au
- Airtasker Australia. Signage installation services, typical task range of $215 to $562. airtasker.com
- BannerBuzz Australia. Acrylic letters from $20.48 and aluminium letters from $50.03. bannerbuzz.com.au and the acrylic letters page
- Aussie Clotheslines and Letterboxes. Corten powder coated aluminium faceplate at $578. aussieclotheslines.com.au
- New South Wales Planning Portal. Advertising and signage exempt and complying development rules. planningportal.nsw.gov.au
- Byron Shire Council. Byron Development Control Plan 2014 Chapter B10 on signage. byron.nsw.gov.au
- NSW Fair Trading. Electrical compliance requirements, all electrical wiring work by, or under the supervision of, a licensed electrician. fairtrading.nsw.gov.au
- SSAB. Building in a new sustainable way with SSAB Weathering steel, service life of 40 to 100 plus years in C3 conditions when applied properly, comparable to coated carbon steel, and practically zero need for maintenance. ssab.com
- SignPermit. Signage cost calculator and permit guide, a three part model of sign supply, installation and council permit fees, a standard shopfront complying development estimate of $150 to $800, application document guidance and heritage application timing. signpermit.com.au
- Armsign. Frequently asked questions, engineering certificates for structures over 2400mm in height, and entry signage materials including weathering steel. armsign.com.au and the entry signage guide
- Sostron. Melbourne outdoor digital signage pricing guide, structural engineering and certification at $2,000 to $8,000 additional for large freestanding signs. sostron.com
- Sign and Fitouts and Custom Neon. Published Australian terms, a 1 year limited warranty over defects in materials and workmanship from Sign and Fitouts and a 3 year warranty covering outer sign materials and internal electrical components from Custom Neon. signandfitouts.com.au and customneon.com.au
- The Factory. Signage tax benefits, Australian Taxation Office treatment of signage as advertising and marketing and as a depreciable asset. the-factory.com.au
- Custom Steel Appeal. Gum Leaves property sign in REDCOR weathering steel from $160. customsteelappeal.com.au
- Russell Sign and Print. Quotes, production and design process, artwork charges from $40 to $80 plus GST or $80 per hour plus GST. russellsignandprint.com.au
- Hot Cut. Property sign information, pallet delivery of a 240 by 120 centimetre sign at $100 to $150 to most places. hotcut.com.au
- Auslift. Scissor lift hire rates, a 19 foot electric unit at $149.16 a day including GST and a 26 foot unit at $211.31 a day including GST. auslift.com.au
- Porter’s Paints. Instant Rust Clear Sealer guidance, recoating recommended every 12 months. duluxtrade.com.au
- Murobond. Rust Paint data sheet, recoating at 12 to 18 months in fully exposed applications and not recommended for metal surfaces outside. murobond.com.au
- Environmental Planning and Assessment Act 1979. Sections 4.2, 9.52 and 9.53, the offence of carrying out development without consent and the Tier 1 and Tier 2 maximum penalties. legislation.nsw.gov.au
- Environmental Planning and Assessment Regulation 2021. Sections 91 and 133, assessment periods for development applications and determination times for complying development certificates. legislation.nsw.gov.au
- COR10 Steel Byron Bay. Live product and quote pages checked on 21 October 2026. cor10steelbyronbay.com.au, 3D letters and the quote page