Corten Steel Water Feature in Australia
A Corten steel water feature works in Australia. Our large customised water features cost from $5,950 to $12,550 depending on design, including the bowl and base, with a lead time of 12 weeks.
The split is simple. The outside weathers bare on wet and dry cycles, and the inside basin must be lined or sealed, or the water stays orange. We make large customised water features, not the small ones readily available online. We are COR10 Steel, a Corten steel fabricator in Byron Bay.
Get monthly Corten price updates and project ideas
Does a Corten water feature need sealing?
Yes, in one place only. The outside needs none, and the inside basin needs it every time. HERA says weathering steel members must not be immersed in water. Seal the basin with epoxy, polyurea or pond membrane, or fit a concealed stainless tank inside the shell.
Learn what Corten steel is first.
What types can I buy?
Bowls run from 450 to 1200 millimetres across. Rain curtains run from 800 to 2400 millimetres wide. Water tables run from 800 to 1200 millimetres square, and up to 4 metres long. Ponds run from 2000 to 3000 millimetres long.
How thick should the steel be?
Our water features use steel 2 to 3 millimetres thick. The AHL guide gives 3 millimetres as standard for residential garden bowls, and 4, 5 or 6 millimetres for commercial projects. Our grades are WR350A, HW350A and CW300A, confirmed for our dry work.
Sheet thickness and price are separate questions. See our cladding cost guide.
Which type suits my garden?
All prices in the table below are other makers prices. GST is unknown on each one.
| Type | Size | Thickness | Lining | Flow rate | Price | Who it suits |
|---|---|---|---|---|---|---|
| Bowl | 450 to 1200 millimetres across | Ours 2 to 3 millimetres, others 3 millimetres | Sealed inside | 600 to 1,500 litres per hour per bubbler | Outdoor Escape, WaterFeaturesAdore and ToolMarket, $539 to $6,426 | Courtyards and small gardens |
| Rain curtain | 800 to 2400 millimetres wide | Not stated for this type | Sealed inside | 900 to 1,500 litres per hour per 300 millimetres of weir | OTTop curtain $4,000 ex-depot | Walls and large gardens |
| Water table | 800 to 1200 millimetres square, to 4 metres long | Adezz water tables use 2 millimetres | Sealed inside | 900 to 1,500 litres per hour per 300 millimetres of weir | Not listed in Australia | Modern gardens |
| Pond | 2000 to 3000 millimetres long | 4 millimetres or more is ideal for a filled vessel | Polyurea | Not stated for a pond | Not listed in Australia | Fish and large gardens |
The table spans different types and sizes, so the prices are not like for like for the same product.
What size pump do I need?
Our design uses water channels embedded into the sculpture, with small fine plastic tubes. Our sculpture plugs into a normal portable water pump, solar or electric. The pump draws water from the bowl at the bottom and brings it through the channels to the top, and the water just recirculates.
The AHL guide gives 600 to 1,500 litres per hour for a bubbler, and 900 to 1,500 litres per hour per 300 millimetres of weir for a gentle curtain. A 1200 millimetre cascade with dual inlets needs 6,000 to 9,600 litres per hour. A pump rated flow is measured at zero head. Actual flow falls with head height and pipe friction, so size the pump from its performance curve at the real head height. HERA says alternate wet and dry cycles are required for a patina to form, so switching the pump off for 4 to 8 hours a day lets the steel dry. Solar pumps suit small bowls only.
How do I install it?
Per the AHL guide, the overflow edge must be level within plus or minus 1 millimetre, and a 900 millimetre spillway tilted 2 to 3 millimetres runs dry on the high side. Large features need a 5 to 10 centimetre concrete base, cured for 24 to 48 hours. The water must stay at least 100 millimetres above the top of the pump. A licensed electrician is required, and the pump must run on an outdoor RCD protected circuit. Fill, run and drain 2 to 3 times over the first 2 to 4 weeks.
How long does the patina take?
The colour changes in stages.
- 2 to 8 weeks, warm orange tones, per the AHL guide.
- 6 to 18 months, the brown look, by site and weather.
- 18 to 24 months, stabilising outdoors, per Corten Australia.
- 2 to 6 years, final appearance, per SSAB.
Expect orange first, then brown, then a deep settled colour. Flakes over 6 millimetres indicate a non protective patina. Our water sculptures get the same sea curing treatment as all our other products, so our 4-week seawater cure applies to water features. This is our own workshop process, not a general industry recommendation. We apply seawater daily in direct sun over about 4 weeks before installation, with no chemical accelerants, and the basin interior is sealed, so the cured steel is not sitting immersed in use. HERA says weathering steel members must not be immersed in water.
See our 4-week curing process.
How do I look after it?
Replace the water every 2 to 3 weeks, clean monthly in summer, and use a soft brush with clean tap water or mild soapy water only. Never add chlorine tablets, bromine, hydrochloric acid, strong pool disinfectants, copper sulfate or salt based pool chemicals. BlueScope says strong acid and salt permanently damage the protective properties of weathering steel.
What goes wrong?
Orange water. Early runoff turns the water bright amber or orange. The fix is a lined basin, and 2 to 3 flushes in the first 2 to 4 weeks.
Stained paving. Rust runoff stains porous paving for the first 3 to 9 months. The fix is to keep porous paving 1 to 2 metres away.
Noisy pumps. The wrong pump size is the most common cause of noise, splashing and weak flow. The fix is to match the flow to the weir.
Algae. Warm still water grows algae, and algae clogs filters and strains the pump. The fix is fresh water every 2 to 3 weeks and shade where you can.
Can fish and plants live in it?
Yes, when the pond is lined. BuyMetalOnline says a polyurea lined pond is safe for fish, plants and wildlife, and unlined Corten ponds can leach into water. Optimal pH is 7.2 to 7.8, per the AHL guide, and cycle the water for 2 to 3 weeks before stocking.
Can I put one near the coast?
Our verdict is fine with conditions. HERA puts the limit at 2 kilometres from the open seacoast and 500 metres from calm salt water, as a general guide for weathering steel. BlueScope gives the same 2 kilometre general rule, with an exception where exposure testing confirms a first year corrosion loss under 50 microns per year. Byron Bay time of wetness is 41 percent, below the 60 percent limit. SSAB publishes no shoreline distance at all. Our case by case seaside experience is with sculptures and 3D products. A water feature near the coast is a separate question. Within 2 kilometres of open surf, ask us first.
See our Corten near the coast guide for sculptures by the sea.
Do I need council approval or a pool fence?
The rules below are for New South Wales only, and other states differ. In New South Wales, the Swimming Pools Act 1992 defines a swimming pool as a vessel deeper than 300 millimetres and solely or principally used, or designed, for swimming, wading or paddling. A decorative Corten water feature is not a swimming pool under the Act. Water features and ponds are exempt development under the Codes SEPP Subdivision 40, at depth 300 millimetres or less and area 10 square metres or less, per the City of Ryde summary. This applies where the development standards are met and the exclusions do not apply. In Queensland, an ornamental pond made and used for ornamental purposes is not a regulated swimming pool under Queensland pool safety laws. Check with the local council before you build, in any state.
What does it cost to run?
A 100 watt pump costs about $242 a year at 28 cents per kilowatt hour, per Ozponds. Each square metre of water surface can lose up to 8 litres a day in warm conditions, per Aquatic Technologies.
What does COR10 make?
We make large customised water features. Our steel is 2 to 3 millimetres thick. Our sculpture plugs into a normal portable water pump, solar or electric, and the water just recirculates. Our large customised water features cost from $5,950 to $12,550 depending on design, including the bowl and base, with a lead time of 12 weeks, and GST is unknown on the price. A pump can be supplied for around $650, GST unknown. Our water sculptures get the same sea curing treatment as all our other products.
See our custom sculpture cost guide for dry sculpture prices by size.
Ask us for a custom water feature quote.
Your piece is made to order in Byron Bay.
Get a free quote You can also call 0439 668 614.
Frequently asked questions
Does a Corten steel water feature need sealing?
Yes, in one place. The outside weathers bare, and the inside basin must be lined or sealed.
Why is the water orange, and will it stay orange?
Early runoff turns the water bright amber or orange. A lined basin is the fix.
Can fish and plants live in a Corten steel pond?
Yes, when the pond is lined. Cycle the water for 2 to 3 weeks before stocking.
Can I put a Corten steel water feature near the coast?
Yes, with conditions. HERA puts the limit at 2 kilometres from the open seacoast. Within 2 kilometres of open surf, ask us first.
How much does a Corten steel water feature cost in Australia?
Our large customised water features cost from $5,950 to $12,550 depending on design, including the bowl and base, with a lead time of 12 weeks. GST is unknown. Other makers sell small features from $539 to $6,426.
Do I need council approval or a pool fence for a water feature in NSW?
In New South Wales, a decorative feature is not a swimming pool under the Swimming Pools Act 1992 section 3. In Queensland, an ornamental pond is not a regulated swimming pool. Check the local council.
Sources
Last updated 9 November 2026.
- SSAB COR-TEN design guide
- HERA Weathering Steel Design Guide, Rev 2
- BlueScope REDCOR Technical Bulletin 26
- AHL Corten, Water Feature Guide
- AHL Corten, Maintenance Tips
- Corten Australia, What Is Corten Steel
- Outdoor Escape, Round Water Feature
- WaterFeaturesAdore, Bubbling Bowl
- ToolMarket, Neptune Water Fountain
- OTTop, Round Water Features
- Adezz, Corten Steel Ponds and Pond Walls
- BuyMetalOnline, Corten Steel Pond
- Ozponds, Cost to Run a Pond Pump
- City of Ryde, Water Features and Ponds
- Codes SEPP 2008, in force
- NSW Swimming Pools Act 1992, via NSW Government
- Aquatic Technologies, AquaFilm leaflet
- Queensland Building and Construction Commission, Swimming pool safety laws