How Much Does a Custom Corten Steel Sculpture Cost? [2026]

Wildflames outdoor sculpture featuring rust-brown Corten steel and silver metal blades beside a modern coastal hotel and swimming pool.

A custom corten steel sculpture from our workshop runs from AU$1,750 for a 1 metre piece to AU$5,850 for a 2 metre sculpture, with large custom works up to AU$25,000, all excluding GST. The wider Australian market stretches further, from AU$34 for ready-made garden art on Etsy Australia to about AU$40,000 for a large one-off artist work. Market figures below are indicative ranges from published listings, with our own pricing in the COR10 rows.

This guide lays out that ladder, shows what actually moves the price, explains how sculptors and fabricators build a quote, and walks through the small-garden and public-art ends of the market. If you are also choosing the material, our guide to the best steel for outdoor sculpture covers that decision separately. For why corten costs what it does as a raw material, see why corten steel is so expensive.

The price ladder, at a glance

Size bandIndicative market rangeWhat it typically buys
Garden silhouettes and small pieces, under 50cmAU$34–$150+Laser-cut corten animal silhouettes, garden stakes, small orbs from AU makers
Garden statement pieces, 1–2 metresAU$1,100–$9,700+3D multi-plane corten sculptures, moon gates, large garden spheres
COR10 3D sculptures, 1–2 metresAU$1,750–$5,850 ex GSTOur own workshop pricing: design and seawater cure included, delivery at cost
Gallery and artist works, 1–2.4 metresAU$5,500–$40,000Original one-off corten sculptures from established Australian artists
Council public-art commissionsAU$30,000–$44,000St Arnaud $30–$35k ex GST for a 1×1×1.6m work (design to install); Tara Lagoon up to $44k incl GST (artist fee only, install separate). Public-art budgets, any material.
Monumental and landmark worksUS$50,000–$500,000+ (international)Landmark public art, fully engineered, transported and installed. One Australian example: the Western Roads Upgrade commission at AU$425,000 all-in (public-art budgets, any material).

Figures marked US$ come from international fabricators and public-art programs. The remaining bands are Australian retail listings and published commission budgets, with prices checked in October 2026. GST treatment varies by seller. COR10’s own pricing is quoted excluding GST. RustFab and Handy Steel prices include GST, the St Arnaud commission is quoted ex GST, so confirm before comparing rows.

The small end is anchored by real listings for ready-made pieces, not commissions. Tasmanian maker ImagineMetalArtTas sells a 150mm corten kookaburra for AU$34 on Etsy Australia, while its 460mm wedge-tailed eagle lists at AU$75. At 1.8 metres, Melbourne-based RustFab prices 3D multi-plane corten sculptures at AU$1,100 to AU$1,300 GST included. A 2.1 metre corten moon gate lists between AU$2,122 and AU$3,024 on Etsy, with freight adding roughly AU$350 within Melbourne or AU$600 to New South Wales.

The artist end is anchored by gallery prices. At Blenheim Gallery in Tasmania, John Topfer’s 2026 corten works list from AU$5,500 for a 121cm piece to AU$15,000 for works around 2 to 2.4 metres. Australian sculpture competitions and galleries show one-off corten works from about AU$5,500 up to AU$40,000. Blenheim Gallery’s 2026 catalogue lists John Topfer’s corten works from AU$5,500, while Sculpture for Clyde’s 2024 catalogue lists Sommerset Coker’s folded and welded corten eagle Not a Pigeon at $40,000, which is where the top of that band sits. Globally, fabrication studio Demetrios Sculpture puts small-to-medium custom steel sculptures at US$10,000 to US$50,000, large commercial or public pieces at US$50,000 to US$250,000, and iconic custom designs at US$250,000 to US$500,000 or more. These figures are market observations, not a price list, because every custom piece is quoted on its own drawings.

Size is only one price variable, and it is not the price itself

Geometric low-poly corten steel kangaroo sculpture built by COR10
Custom 3D corten kangaroo from our Byron Bay workshop. Custom 3D sculptures start from AU$1,750 ex GST.

A sculpture twice as tall does not cost twice as much, and it does not cost four times as much either. D&Z Sculpture’s pricing guide states the relationship plainly, noting that once a project passes a few metres, stronger internal framing, segmented fabrication, larger packing, professional lifting equipment, bigger foundations and heavier transport take over from raw material as the main cost drivers. The guide gives a concrete illustration with three sculptures at the same 3-metre height. A simple geometric corten piece, a mirror-polished stainless abstract and a realistic bronze horse can price several times apart because their internal structure, manufacturing method, labour and installation requirements are completely different.

That is why comparing quotes by height alone misleads. A flat laser-cut corten panel of 2 metres and a 2-metre fully welded 3D form are different products wearing the same dimension. The useful comparison is how much material, labour, engineering and delivery sit behind each quote, which is exactly what the next section breaks down.

What actually moves the price

DriverWhy it mattersMarket anchor
Steel thicknessThicker plate weighs more, costs more per sheet, and needs heavier cutting and welding1.6mm suits garden silhouettes, while 3mm is a common starting point for structural pieces, with the final thickness set by the engineering. A 3mm corten sheet at 1200 by 3000mm retails in Australia for about AU$358 including GST.
Design complexityFlat laser-cut profiles cut fast. Rolled, folded and figurative forms add hours of forming, welding and finishingIntricate folded and figurative forms multiply forming, welding and finishing hours, which is why two sculptures at the same height can price several times apart
Finish and patinaNatural weathering costs nothing but time. Pre-weathering, sealing and protective coatings add labour and materialsVisible colour develops within months on a fresh piece, though the stable protective patina takes years (SSAB: 18 to 36 months, maturing over 2 to 6 years)
Internal structure and engineeringLarge outdoor works need frames, footings and certified drawings, not just a shellDesign and engineering typically runs 5 to 10 percent of total project cost on custom sculpture (stainless steel guide)
Transport and installationCranes, rigging, site preparation and freight scale fast with weight and distanceInstallation for large sculptures runs US$2,000 to US$10,000 or more when cranes and rigging are needed (Demetrios, international)
Artist reputationEstablished names charge for demand, waiting lists and resale value as well as labourEmerging artists price custom work from about US$5,000 to US$30,000, while famous artists start around US$100,000 (Demetrios, international)
Cost split on our workOn our 1 to 2 metre sculptures, materials run about 40 percent, finishing and seawater cure 25 to 30 percent, and design and engineering 10 percent, with cutting and welding making up the balanceCOR10 workshop figures; Australian boilermakers and fabricators advertise employee rates of AU$35 to AU$55 per hour, with casual rates to AU$55 plus penalties, while workshop charge-out rates run higher once overhead is included

Steel is often not the largest line on the invoice. On hand-built pieces, the hours of cutting, forming, welding and finishing can dwarf the cost of the plate itself, though the exact split varies from workshop to workshop.

How sculptors and fabricators build a quote

There is no single formula. Most makers start from the hourly approach: hours multiplied by rate plus materials, though a workshop’s charge-out rate usually runs higher than an employee wage once overhead, tools and margin are included.

Commissions also carry a service charge. Pricing guidance for artists recommends adding 10 to 25 percent on top of the normal price for a piece of that scale, because a commission adds communication, research, revisions and client management that a speculative piece never needs. The same guidance is blunt about deposits, advising makers to take 50 percent before beginning work.

The most useful question a buyer can ask is not whether the price can come down, but what exactly is included. A complete quote should state whether design and modelling, the steel, fabrication, surface finish, internal structure, crating, freight, foundations, crane hire and on-site installation are in or out. D&Z Sculpture’s guide makes this the centrepiece of its buying advice, noting that a AU$20,000 quote with installation included can easily beat a AU$24,000 quote that leaves the crane to you.

The small-garden end of the market

Under about 2 metres, corten sculpture behaves like garden product pricing. Moon gates are the clearest example, with 2.1-metre corten gates listing at AU$2,122 to AU$3,024 on Etsy and freight adding a few hundred dollars more. Hollow garden spheres reach AU$4,748 and up for a 90cm zen sphere, with smaller pieces priced lower. Water features from Australian retailers list between AU$899 and AU$1,959, while corten fire pits start around AU$759 to AU$889 at Outdoor Escape and reach AU$2,155 for Workshop 10’s made-to-order South Australian pit. Planters sit lower again, from small tree rings up to large custom boxes.

Lead times are short at this end. Etsy makers quote 4 to 6 weeks for handmade-to-order pieces, Australian laser-cut studios work to similar timelines, and made-to-order fire pits run 4 to 6 weeks. Several listings note the piece ships in a fresh state and visible colour develops within months, which is the trade for buying at product prices rather than paying for a pre-weathered finish. The stable protective layer takes far longer to form.

The public-art end of the market

Public commissions publish their budgets, which makes this the most transparent end of the market. These are public-art budgets rather than corten-specific prices, since most briefs do not name a material. Council percent-for-art policies commonly set these budgets at 1 percent of construction cost. Northern Grampians Shire Council’s 2026 St Arnaud commission offers AU$30,000 to AU$35,000 excluding GST for a sculpture up to 1 by 1 by 1.6 metres, covering community engagement, design and installation. The Tara Lagoon Parklands commission in Queensland budgets up to AU$44,000 including GST for the artist, with installation funded separately. Melbourne’s Western Roads Upgrade commission was valued at AU$425,000 all-in, covering fabrication, transport, installation and the artist’s fee.

Closer to home, Byron Shire Council’s own public-art records show what installation adds. The 2018 Mullumbimby Gateway project totalled AU$28,700, including AU$1,000 for structural engineering plans, AU$1,500 in artist fees and a AU$4,000 line for crane hire and lifting. Engineering, lifting and site work are not rounding errors on public pieces, which is why experienced fabricators price them as separate line items rather than absorbing them into the sculpture.

Corten against the alternatives, on price

Corten sits in a useful middle ground. D&Z Sculpture’s guide notes that corten often avoids the long-term painted coating systems ordinary carbon steel needs, which can make it cost-effective for large and relatively simple designs, while complex curves, thick plates and heavy internal structures still push the price up significantly. Against bronze, corten fabrication is usually cheaper at the same scale because it skips the model, mould and lost-wax casting chain, though bronze still wins for fine figurative detail. Our corten cost guide breaks down retail prices and fabrication costs in detail.

What COR10 charges

The ranges above describe the market. Our own 3D sculptures start from AU$1,750 for a 1 metre high piece and run to AU$5,850 for a 2 metre sculpture, with large custom works up to AU$25,000 depending on size and complexity, all excluding GST. Those figures include design and our seawater cure, and every sculpture is quoted on its own drawings because each piece is highly customised. Our Wildflames pair, two sculptures of 2 and 3 metres in 3mm corten steel with a hot-dipped galvanised finish, was built for the Sebel Hotel Group at Maroochydore. For outdoor sculpture we work in Australian high-phosphorus weathering grades (WR350A, HW350A and CW300A), comparable weathering grades to the CORTEN trade name. We cure our corten pieces with a 4-week seawater process in direct sun, using no chemical accelerants.

The COR10 rows above are our own current figures. Delivery is charged at cost. Installation is straightforward: every sculpture ships with base plates, and most clients have it installed by a licensed professional. We advise on installation wherever needed. For coastal sites, sealing the finished sculpture becomes part of the client’s own maintenance routine.

Wildflames corten steel sculpture pair in the COR10 workshop before installation
Wildflames in our workshop before installation. The 2 and 3 metre pair was built for the Sebel Hotel Group at Maroochydore.

For an accurate figure on your project, browse our 3D sculptures, then send the dimensions, a sketch or reference image, and the install location through our quote page. The more specific the brief, the closer the quote lands to the final cost.

Frequently asked questions

How much does a custom corten steel sculpture cost in Australia?

Our 3D sculptures run from AU$1,750 to AU$5,850 ex GST for 1 to 2 metre pieces, with large custom works up to AU$25,000 ex GST. On the wider market, small garden pieces list from about AU$34 to AU$150 on Etsy Australia, statement pieces of 1 to 2 metres list between about AU$1,100 and AU$9,700, and original artist works of 1 to 2.4 metres list from about AU$5,500 to AU$40,000. Large Australian public-art commissions run from about AU$30,000 to AU$44,000, major programs reach AU$425,000 and beyond, and monumental works internationally start around US$50,000. These are indicative market ranges, and every custom piece is quoted on its own drawings.

Why do two sculptures the same size cost different amounts?

Because size is only one price variable. A flat laser-cut profile and a fully welded 3D form at the same height carry completely different amounts of forming, welding, finishing, internal structure and installation work. Steel thickness, design complexity, finish, engineering and the artist’s reputation all move the price independently of height.

What is the cheapest way to buy a corten sculpture?

Buy a small-batch or made-to-order garden piece rather than commissioning a one-off. Laser-cut silhouettes, spheres and moon gates spread their design cost across many sales, which is why a 2.1-metre moon gate lists around AU$2,100 to AU$3,000 while a one-off artist work of similar size can list at AU$15,000. Accepting a fresh, unweathered finish and letting the colour develop over months rather than paying for pre-weathering also keeps the price down. The protective patina itself takes years to stabilise.

How much does installation add to a large sculpture?

Budget separately for it. Published figures put large-sculpture installation at US$2,000 to US$10,000 or more when cranes and rigging are needed, and Byron Shire Council’s gateway project spent AU$4,000 on lifting alone within a AU$28,700 total. Freight, foundations and site preparation sit on top. Always ask whether a quote includes installation or stops at the workshop door.

How long does a custom sculpture take?

COR10’s lead time is 12 to 14 weeks from a 50 percent deposit, with the balance due before delivery. Small makers quote 4 to 6 weeks for handmade-to-order garden pieces, and Australian laser-cut studios work to similar timelines. Patina development adds its own timeline. Visible colour shows within months, while the stable protective layer takes years (SSAB: 18 to 36 months, maturing over 2 to 6 years).

Do sculptors ask for a deposit?

Yes, and a 50 percent deposit is widely recommended. Pricing guidance for artists advises taking half before beginning work on any commission, because materials are ordered and workshop time is booked against your project. COR10 takes 50 percent up front with the balance due before delivery. Treat a maker who asks for no deposit with the same caution as one who asks for all of it.

Sources

All prices checked October 2026.

  • Etsy Australia — corten garden sculpture listings (kookaburra AU$34, wedge-tailed eagle AU$75, moon gates AU$2,122–$3,024, zen sphere AU$4,748+, SharpMetals Gazing AU$9,738.82). etsy.com
  • Blenheim Gallery and Garden, Tasmania — John Topfer Summer Show 2026 catalogue (corten works AU$5,500–$15,000). blenheimgalleryandgarden.com.au
  • Sculpture for Clyde 2024 catalogue — Sommerset Coker’s Not a Pigeon, folded and welded corten steel, $40,000. sculptureforclyde.com.au
  • RustFab, Bayswater VIC — 3D multi-plane corten sculptures AU$1,100–$1,300 GST included. rustfab.com.au
  • ArtsHub — St Arnaud public art commission AU$30,000–$35,000 ex GST; Tara Lagoon commission up to AU$44,000 incl GST. artshub.com.au
  • Netflow — Western Roads Upgrade public art commission valued at AU$425,000. netflowjv.com.au
  • Byron Shire Council — Mullumbimby Gateway public art costs 2018 (total AU$28,700, engineering AU$1,000, lifting AU$4,000). byron.infocouncil.biz
  • D&Z Sculpture — custom sculpture cost guide (bands, non-linear scaling, quote scope). dzsculpture.com
  • Demetrios Sculpture — commissioning cost bands and installation figures (steel sculptures generally, international). demetriossculpture.com
  • Vocal Media — stainless sculpture cost guide (design and engineering at 5–10 percent of project cost). vocal.media
  • Jacksons Art Blog — commission pricing advice (10–25 percent service charge, 50 percent deposit). jacksonsart.com
  • D Magazine — commissioning advice: expect about a 50 percent deposit on a commissioned piece. dmagazine.com
  • SEEK — boilermaker job ads in Sydney and Brisbane advertising AU$35 to AU$55 per hour plus penalties (ads observed October 2026). seek.com.au
  • Handy Steel Supplies — 3mm corten sheet 1200 by 3000mm at AU$358 including GST. handysteelsupplies.com.au
  • Outdoor Escape — corten water features AU$899–$1,959 and fire pits AU$759–$889. outdoorescape.com.au
  • Workshop 10, Port Elliot SA — made-to-order corten fire pit AU$2,155, 4–6 week lead. workshop10.com.au
  • City of Vincent WA — percent-for-art policy at 1 percent of construction cost. vincent.wa.gov.au
  • Town of Victoria Park WA — Policy 115 sets the public-art budget at 1 percent of the estimated building value. victoriapark.wa.gov.au

Similar Posts