Buying a Corten Sculpture on the Sunshine Coast

Geometric corten steel kangaroo sculpture in a garden

159 sculptures were exhibited at Flaxton Gardens in 2025 and 45 of them sold. 96 artists will show there for 9 days in 2026.

We build corten sculptures in Byron Bay, from $1,750 ex GST, and we deliver them to Sunshine Coast gardens at cost. This page answers what Flaxton visitors ask once they are home, which is what size fits their garden, where it should sit, what salt air does to it, what it costs and how long it takes.

Nine days at Flaxton Gardens, and every sculpture there is for sale

Sculpture on the Edge runs for 9 days at Flaxton Gardens in 2026.

It is the 17th year of the event run by Arts Connect Inc, from Saturday 28 November to Sunday 6 December 2026 at Flaxton Gardens, 313-323 Flaxton Drive, Flaxton. 96 artists will show work in its indoor and outdoor galleries, and every sculpture exhibited there is available for purchase. In 2025 the event drew 4,400 visitors, showed 159 sculptures and sold 45 of them. Admission is $20 for adults, $15 for seniors and concession holders, and free for children under 16, from 8am to 3pm daily.

We are a Byron Bay workshop, and this page exists because Flaxton is where many Sunshine Coast buyers first ask serious questions about a sculpture. A work that reads perfectly on an escarpment lawn still has to survive a different garden at home.

Our largest sculpture already stands at Maroochydore

Our largest 3D sculpture ever built stands at Maroochydore.

Wildflames is a pair of sculptures built for the Sebel Hotel Group, part of Accor, at Maroochydore. One piece is 2 metres high and the other is 3 metres high, both made in 3mm plate, with flame forms in corten and galvanised steel. The 3 metre piece weighs about 220kg and the 2 metre piece weighs about 155kg. See the project page, Wildflames Sculptures for Accor, Maroochydore, Queensland.

Wildflames sculptures installed at the Sebel Hotel, Maroochydore
Wildflames at Maroochydore. The Wildflames sculptures installed at the Sebel Hotel, Maroochydore, Queensland.

Wildflames is a hotel commission at Maroochydore, near the ocean. Its value here is scale, a 2 metre piece and a 3 metre piece built and delivered to the Sunshine Coast.

The size that worked on Flaxton’s lawn is not the size your garden needs

Flaxton flatters a sculpture, and your garden will test it.

Flaxton Gardens sits high on the escarpment, with long sight lines and views from Moreton Island to Noosa. At home the test is closer, which is the view from the house and the hedge behind it.

General buying guidance from ARTpark puts the scale rule plainly. A sculpture should be viewed from around 3 times its height, so decide where it will be seen from before you settle on size. A piece under 1 metre tends to disappear against mature gums or established hedging, while the same piece reads perfectly in a courtyard or beside a pool. A 1 metre piece suits a courtyard or a pool garden at Mooloolaba or Buderim. A 2 metre piece needs a viewing distance of about 6 metres or more. Acreage and escarpment gardens at Doonan, Flaxton and Montville can carry a 3 metre piece.

Siting a sculpture on a sloping hinterland block, from Buderim to Maleny

A slope changes the footing question before it changes anything else.

Hinterland gardens run over sloping, wet and shaded ground, so a sculpture there needs a level, stable base, and the bigger the piece the more that base matters.

General guidance from ARTpark is that smaller works sit on a paver, a plinth or directly on the ground, while anything above roughly 1.5 metres generally wants a concrete footing and larger pieces need engineered footings and certified installation. That threshold is general guidance from ARTpark. Garden scale pieces are built for base plates and we advise on installation where needed, and larger pieces are usually left to licensed professionals. Access decides before size does, since a hiab or crane may be needed and a narrow side gate rules out a surprising number of works, so measure the gate, path and turning space before the piece is built. For pale paving, allow a drip zone, and see our rust staining article, How to Stop Corten Steel Rust Staining Your Concrete and Pavers, for the full method.

Siting one on the coast strip, from Noosa to Caloundra, and the salt question

Corten already stands in public on this coast, and the salt question still deserves an honest answer.

At Caloundra, a 40 metre roadside balustrade called Ebbtide was built in 2017 for Sunshine Coast Regional Council, with corten among its materials, on Bulcock Street. That is a council project. The generic position is less comfortable. ARTpark states that corten performs best where it can dry out between wet spells, and that on sites exposed to constant salt spray it usually recommends bronze or 316 grade stainless steel instead.

Our position is our own professional position. We hold no standard protocol for seaside sites, and every seaside site is judged case by case. Over 75 percent of our sculptures and 3D products are installed less than 250 metres from the sea. Pieces arrive with their patina started by the 4 week cure. When you are happy with the look, we recommend you seal it with Penetrol, applied by you after a soft wire brush, with no washing unless there are visible stains, reapplied when faded. Sealing is your job after delivery, and it is separate from the price. That is what we recommend for seaside sculptures, judged site by site. We make no blanket promise for every seaside site, and we name no safe distance. Our national coastal article, Corten Steel Near the Coast, What Salt Air Really Does to It, sets out the same position.

Why a COR10 sculpture does not arrive grey

A new corten sculpture on the open market may arrive grey or bright orange.

General guidance says it then settles into a stable rich brown over several months to a couple of years. That wait is normal for an uncured piece, and our buyers start from a different place. We cure our corten sculptures with seawater applied daily in direct sun over about 4 weeks, here in Byron Bay, with no chemical accelerants and only organic seawater. The cure gives the piece its golden rusty colour, so it leaves our workshop with colour already on it, and the patina keeps developing outdoors after installation.

Wildflames sculpture pair in the COR10 workshop before installation
In the workshop. The Wildflames sculptures during construction in the workshop.

Our sculptures use high phosphorus weathering steel, in grades WR350A, HW350A or CW300A, the domestic equivalents of the CORTEN trade name. Wildflames used 3mm plate, and that is the Wildflames specification for that pair. Our curing process page, Our Natural 4 Week Corten Steel Curing Process, sets out the process in full.

What a made-to-order corten sculpture costs a Sunshine Coast buyer

Our figures are below, in full.

A custom corten steel sculpture is priced by size and complexity, and the price includes design and the seawater cure. Delivery is charged at cost. Across all sculptures, prices run from $1,750 to $25,000 ex GST.

SizePrice ex GSTWhat is included
1 metre sculpture$1,750Design and 4 week seawater cure
2 metre sculpture$5,850Design and 4 week seawater cure
Large custom sculptureUp to $25,000Design and 4 week seawater cure, by size and complexity

Three things move the number for a Sunshine Coast buyer, which are height against viewing distance, footing and lifting on a slope, and delivery access. For the full market ladder, see our sculpture cost page, How Much Does a Custom Corten Steel Sculpture Cost?.

Twelve to fourteen weeks from deposit to a steep Flaxton driveway

Our lead time for sculptures is 12 to 14 weeks.

The terms are plain. A 50 percent deposit is paid up front, and the balance is paid before delivery. Delivery is charged at cost. The structural warranty runs from 24 months to 5 years. An order placed straight after the exhibition closes on 6 December 2026 falls around March 2027. Measure the gate width, path and turning space for a truck and a hiab before delivery day.

Planning a sculpture for a Sunshine Coast garden?

Get a free quote. Tell us it is a sculpture for a Sunshine Coast garden, send a photo of the site, and tell us where you will see it from and how a truck gets in. You can also call 0439 668 614.

Five checks before you ask us to quote a sculpture for your block

Five checks, each drawn from this page, will make the quote closer to the final cost.

Where will you see it from. Check the viewing distance and the view from inside the house.

Is the ground flat, sloped, or shaded and wet through winter. The footing question follows the ground.

How far is the site from the surf, and is it spray exposed or sheltered. Send a site photo for the case by case call.

What is under it. Gravel, a garden bed or a dark plinth is the safe start.

How does a truck and a hiab get in. Gate width and turning space decide the delivery plan.

Ready to check your block?

Get a free quote. Tell us it is a sculpture for a Sunshine Coast garden and send a photo of the site.

Frequently Asked Questions

What size sculpture suits a courtyard?

A 1 metre piece suits a courtyard or a pool garden, where the viewing distance is about 3 metres. View a sculpture from around 3 times its height, so a 2 metre piece needs about 6 metres of viewing distance.

How much does a corten steel sculpture cost?

Our sculptures start from $1,750 ex GST, with a 1 metre piece at $1,750 and a 2 metre sculpture at $5,850 ex GST, and large custom works up to $25,000, including design and the 4 week cure, with delivery at cost. See our sculpture cost page, How Much Does a Custom Corten Steel Sculpture Cost?.

Will a corten sculpture stain my paving?

It can, while a surface is still weathering. Place corten on gravel, garden beds or a dark plinth, or allow a drip zone. Our pieces arrive with their colour already started by the 4 week cure, so the heaviest early runoff phase is largely behind them, but staining is still possible.

Is corten steel OK right on the coast at Noosa or Caloundra?

It is a case by case call per site. Generic guidance warns against constant salt spray, and our position as the maker is that corten sealed with Penetrol by you, when you are happy with the look, is what we recommend for seaside sculptures. We make no blanket yes.

How long until my sculpture is in my garden?

12 to 14 weeks from a 50 percent deposit, with the balance paid before delivery and delivery charged at cost. An order placed after the exhibition closes on 6 December 2026 falls in around March 2027.

Who installs it?

Garden scale pieces ship with base plates and we advise on installation where needed. Larger pieces are usually left to licensed professionals.

Note. COR10 does not exhibit at, sponsor, or sell at Sculpture on the Edge, and holds no endorsement from Sculpture on the Edge, Arts Connect Inc or Flaxton Gardens.

Sources

Similar Posts