How Many Corten Steel Panels Does a Courtyard Need

Corten steel panels, 2mm, during curing

A 3 by 3 metre courtyard fenced on 3 sides needs 6 positions, and a position is one panel place in the fence. A 4 by 5 metre courtyard fenced on two 4 metre sides and a 5 metre back needs 7 positions, and a 6 by 8 metre courtyard fenced on two 6 metre sides and an 8 metre back needs 10 positions. A 6 by 8 metre courtyard fenced on all 4 sides needs 14 positions.

That count buys a 1.0 metre high fence, and many courtyard buyers ask for about 1.8 metres. A taller fence is made to size, and its height and width are settled when we quote it, so this guide does not promise the same count for a taller fence. For a taller panel, divide each run by the width of the panel we quote you, instead of 2.26, and round up. Our standard panel is 2260 millimetres by 1000 millimetres, 2 millimetres thick, from $395 GST included.

How Many Panels a Courtyard Needs at 2.26 Metres a Panel

The count comes from the run length, not from the floor area. Two courtyards with the same floor area can need different counts. We count each straight run on its own, divide it by 2.26 metres, and round up.

Positions are the panel places that end up in the fence. Full panels go in whole. A cut piece is the last position in a run, cut to fit. Order by positions, which is full panels plus cut pieces.

Measure Each Courtyard Run Before You Count a Panel

Measure each straight run on its own, in millimetres, from post to post. Do not measure the whole perimeter and divide it once, because that hides the cut position at the end of each run. A 3 metre run needs 2 positions, and a 5 metre run needs 3 positions, so together they need 5 positions, not 4.

Subscribe to COR10

Monthly Corten steel news, blogs and offers.

Get monthly Corten price updates and project ideas

What One Standard Panel Covers at 2260 by 1000 Millimetres

One panel covers 2.26 metres of run and 2.26 square metres. The panel is framed, with pre drilled holes, and brackets or clips welded on if required. Artwork is customisable, and panels can be cut to other sizes. The price is from $395 GST included, for one full panel only. Read our panels guide.

Custom 2260 mm × 1000 mm tree branch Corten fence panel made by COR10 Steel Byron Bay.
Custom 2260 mm × 1000 mm tree branch Corten fence panel made by COR10 Steel Byron Bay.

How Many Panels for a 3 by 3 Metre Courtyard

A 3 by 3 metre courtyard fenced on 3 sides needs 6 positions and 7 posts. The house closes the fourth side. Each run needs 2 positions, because 3 divided by 2.26 is 1.33, rounded up to 2.

Each run has 1 full panel and 1 cut piece of 0.74 metres, priced in your quote.

House closes the fourth side Full 2.26 m Cut 0.74 m Full 2.26 m Cut 0.74 m Full 2.26 m Cut 0.74 m Black dots are posts, 7 in total Cut piece 0.74 m Offcut 1.52 m One panel, 2.26 m, shown as an illustration only

Grey means the house. Rust means a full panel. Light rust with a dark edge means a cut piece. A dot means a post. The offcut in the bar does not change the order.

How Many Panels for a 4 by 5 Metre Courtyard

A 4 by 5 metre courtyard fenced on 3 sides needs 7 positions and 8 posts, when you fence the two 4 metre sides and the one 5 metre back. The 4 metre runs need 2 positions each, and the 5 metre run needs 3 positions, because 5 divided by 2.26 is 2.21, rounded up to 3.

Fence the other way round and the count changes, so name the sides before you order. If you fence the two 5 metre sides and the one 4 metre back, you need 8 positions and 9 posts, and a 4 by 5 metre courtyard fenced on all 4 sides needs 10 positions and 10 posts.

How Many Panels for a 6 by 8 Metre Courtyard

A 6 by 8 metre courtyard fenced on 3 sides needs 10 positions and 11 posts, when you fence the two 6 metre sides and the one 8 metre back. Each 6 metre run needs 3 positions, and the 8 metre run needs 4 positions. Fenced on all 4 sides, it needs 14 positions and 14 posts.

CourtyardPositionsFull panelsCut piecesPosts
3 by 3 m, two 3 m sides plus 3 m back6337
4 by 5 m, two 4 m sides plus 5 m back7438
4 by 5 m, two 5 m sides plus 4 m back8539
6 by 8 m, two 6 m sides plus 8 m back107311
4 by 5 m, all 4 sides106410
6 by 8 m, all 4 sides1410414
10 metre straight run, 1 run5416

Order by positions, which is full panels plus cut pieces. There is no separate panels to buy number.

A gate can cut the count, but where it sits matters

A gate cuts the panel count for its run, and it adds 2 gate posts, but only if you count each segment on its own. A gate in the middle of a run splits that run into two segments, and each segment rounds up on its own.

Take a 5 metre run with a 1.0 metre gate at the end, in a corner. The 4 metres left is one segment, so it needs 2 positions, not 3, and a 4 by 5 metre courtyard drops from 7 positions to 6. Put that same gate in the middle instead, and the 4 metres left splits into 1.5 metres and 2.5 metres, which need 1 position and 2 positions, so the run needs 3 positions, not 2, and the gate saves none. Tell us where the gate sits. A gate in a corner shares the corner post, so it adds 1 new post, not 2.

How Many Posts and Corners a Courtyard Fence Needs

Posts total positions plus 1 for an open run, and the same as positions for a closed loop. A straight run with 5 positions needs 6 posts. A 3 by 3 metre courtyard fenced on 3 sides is an open run, so 6 positions need 7 posts. A gate adds 2 gate posts per opening, except a gate in a corner, which shares the corner post and adds 1. Post sizes and footing depths are settled when we quote it.

Corten steel fence beside lawn, patio and landscaped garden.
Recent COR10 Corten fence panel using clips for installation onto support posts.

What Height the Count Buys and When 1.8 Metres Needs a Custom Panel

The count in this guide buys a 1.0 metre high section. A 1.8 metre privacy fence is not made from one row of standard panels, and it is not made by stacking two rows. Our usual fence heights are 1.2 metres to 1.8 metres.

A taller fence is made to size, and its height and width are settled when we quote it. Do not use this table for a taller fence until we have quoted it, because a different width changes the count. For a taller panel, divide each run by the width of the panel we quote you, instead of 2.26, and round up. That gives you the count for the taller panels, and we will price it in your quote.

Front Courtyards and the 1.2 Metre Rule

A front courtyard fence is limited to 1.2 metres in most Australian residential areas. In New South Wales, side and rear fences are 1.8 metres, and fences along a road boundary are 1.2 metres, with at least 20 percent transparent above 400 millimetres on a secondary road boundary. In Brisbane, street facing fences in traditional character areas are limited to 1.2 metres, and must be at least 20 percent transparent. In Byron Shire, Chapter D1 limits front fences to 1.2 metres, side fences to 1.2 metres within the building line setback and 1.8 metres for the remainder, and rear fences to 1.8 metres. Check with your local council before you build.

Courtyard Pool Fences and the 1200 Millimetre Minimum

A 1000 millimetre panel alone does not work as a pool fence. The numbers look the same in New South Wales and in Queensland, but the law behind them is different, and that matters in Byron, which is in New South Wales.

In New South Wales, the Swimming Pools Act 1992 and Australian Standard AS 1926.1 set the barrier at least 1200 millimetres high, with a gap under the fence of no more than 100 millimetres, a 900 millimetre non climbable zone, and a gate that opens outwards, self closes and self latches, with the latch release at least 1500 millimetres high under AS 1926.1. A boundary fence that forms part of the barrier must be 1800 millimetres high. In Queensland, the same numbers come from Queensland Development Code Mandatory Part 3.4.

Buy a custom panel at 1.2 metres or taller for a pool fence, and ask us to price a panel built to AS 1926.1 in your quote. A standard 1.0 metre panel is too short. Your pool certifier signs off the finished barrier, because we do not certify pool compliance.

Angles and Spare Panels

Tell us about angles, and keep 1 spare full panel for a small courtyard. Angled runs need cut panels made to size, so send us the angle with your measurements. Order in one batch so the colour matches across the whole fence.

What the Panels Cost at 395 Dollars GST Included

Our standard panel costs from $395 GST included, and that price is for one full panel. Take the full panels from the table at $395 each, then add the cut pieces priced in your quote. A 3 by 3 metre courtyard has 3 full panels at $395, which is $1,185, plus 3 cut pieces priced in your quote, not 6 times $395, which is $2,370. A 6 by 8 metre courtyard fenced on all 4 sides has 10 full panels at $395, which is $3,950, plus 4 cut pieces priced in your quote. For the per metre cost, read our fence cost guide and our Brisbane guide.

When to Send COR10 Your Courtyard Measurements for a Quote

Send us your measurements when you have each run length, each gate width and position, and the height you need. We count from your measurements, check the corners and the gates, and price the full panels and the cut pieces together. See our fences.

Measured your courtyard?

Get a free quote. Send us each run length, each gate width and position, and the height you need.

Frequently Asked Questions

Can one row of standard panels make a 1.8 metre courtyard fence?

No. One row of standard panels is 1.0 metre high, and a 1.8 metre fence needs custom panels made to size. Do not stack two rows. The count in this guide is for the standard panel only, and a taller fence needs a fresh count when we quote it.

Does a 1000 millimetre panel work as a pool fence?

No, not on its own. A pool barrier must be at least 1200 millimetres high, and a boundary pool fence must be 1800 millimetres high.

How do I measure a courtyard with a corner?

Measure each straight run on its own, from post to post, and count the corner post once.

What if my run is not a whole number of panels?

Round up to the next whole position, and cut the last panel to fit. A 3 metre run needs 2 positions, with the second panel cut to 0.74 metres. The cut piece is priced in your quote.

Similar Posts