Custom Corten Steel Gates in Ballina: Styles, Sizes and What They Cost
Ballina Shire is adding about 275 new homes a year for the next 20 years, and we could not find one Ballina fabricator selling a corten steel gate. No local fencing company we checked publishes a gate price either.
We are COR10, a custom corten steel workshop in Byron Bay, and our custom gates start from $2,750.
What a custom corten gate costs in Ballina
No corten gate seller we checked anywhere in Australia publishes a price list, and every one of them works quote only. Our gates start from $2,750, and the figures under it are published market bands for custom steel gates from named Australian sources, never corten prices.
A 3 metre single driveway gate is the most common Ballina job. Melbourne Gates publishes $2,250 to $6,250 supply only for a 3000mm steel driveway gate, so a custom corten single from $2,750 sits inside that band.
A 5 to 6 metre double is bigger, and hipages puts a bespoke double at $6,000 to $12,000 or more installed. Add a motor and BMGI publishes $3,000 to $7,000 installed for swing and $4,000 to $10,000 or more for sliding.
The written quote is the number that counts. Our driveway gate cost guide breaks down the full national bands.
The gate styles Ballina buyers choose from
Six styles cover nearly every Ballina entrance.
Laser cut corten panel gates are the hero style, with the pattern openness setting your privacy. Oxworks works corten screens to a 3mm spec with a maximum sheet of 2400 by 1200mm, and that sheet size shapes each panel. Every gate we make carries artwork customised to the client’s requirements, so your pattern is designed with you, never picked from a catalogue.
Solid corten privacy panels give a full screen and a clean rust face. Minimalist flat panels are the estate version for the new homes at Cumbalum and Kinvara.
Slat and open airflow gates let the breeze through, the practical pick for East Ballina, Lennox Head and Skennars Head. Rural frame and infill gates serve the Teven, Tintenbar and Alstonville fringe, with wide spans of 4.2 to 6.0 metres for machinery.
A matching pedestrian gate saves the main gate opening all day for bins and post. One note on style names. Hamptons gates sell in white aluminium or timber and French Provincial in black powder coated steel, and no Australian seller we found offers either in natural corten.
More finished gates and fence work sits in our gallery.
What size gate does your driveway need?
Measure the opening between your posts or piers first, because posts and hardware eat the opening before the leaf is cut.
| Your opening | Gate setup | What gets made |
|---|---|---|
| 3.0m between posts | Single swing gate | One leaf of about 2772mm after posts, hinges and closing gap |
| 5 to 6m between posts | Double swing or sliding | Two leaves sharing the width, or one long sliding leaf |
| No room to swing | Sliding gate | The opening plus about 400mm for the guide and the motor tail |
| Side path or garden entry | Pedestrian gate | 900 to 1200mm wide, with 850mm clear as the mobility minimum |
EasyGate, an Australian hardware supplier, takes 200mm off a 3000mm opening for two 100 by 100mm posts, then 18mm per hinge and a 10mm closing gap, so that opening takes a single gate of 2772mm. A sliding gate is made about 400mm longer than its opening, on a concrete strip about double the gate length. Heights sell at 1200, 1500 and 1800mm.
Swing, sliding or cantilever on a Ballina block
Your block decides the action. Flat estate lots at Cumbalum, Kinvara and West Ballina swing happily. Sloping streets around Skennars Head and Lennox Head punish a swing gate, so sliding is the answer there. Swing is the action most of our clients choose, and where the block allows it, we recommend it first, because a swing gate is more durable and more cost effective to install.
On gravel acreage driveways, a cantilever gate floats on a counterbalance tail of roughly 30 to 40 percent of the opening, so no track crosses the drive to fill with gravel.
Wind closes the argument on the coast. A solid leaf acts like a sail, and automation sources add a 25 to 40 percent motor margin for solid gates in coastal wind.
Can a corten gate be automated?
Yes, a corten gate can be automated. Weight decides the motor. Steel weighs 7,850 kilograms per cubic metre, so 3mm sheet runs 23.55 kilograms per square metre, and a solid 3.0 by 1.8 metre leaf calculates to about 127 kilograms before its frame goes on.
Suppliers size the motor to that weight, oversize it by 25 to 40 percent, and favour sliding actions for heavy solid leaves in coastal wind. Acreage entries with no mains power run on solar, with BMGI solar kits at $600 to $1,200 supply only. Get motor supply, fitting and electrical work itemised in the quote, where gate budgets quietly grow. One difference on our quotes is the opening and closing mechanisms, we supply them at cost price, with no markup from us.
Corten this close to the Ballina coast, the honest answer
Most of Ballina sits close to the sea, and the primary sources are blunt. The Steel Construction Institute, BlueScope and SSAB all urge caution with weathering steel within about 2 kilometres of the coast, so any page calling corten perfect for a beachfront gate is selling rather than informing.
The answer is case by case. A sheltered street behind the dune is a different site from an East Ballina frontage in direct salt spray, and the build follows the site, with detailing that drains freely and runoff control keeping rust water off new concrete. Our guide to corten steel near the coast carries the full science.
Ballina Shire rules for a front gate
Most Ballina front gates need no council approval when they meet the NSW exempt development standards. A front boundary gate caps at 1.2 metres high, side and rear boundaries cap at 1.8 metres, and gates must not open outwards over the footpath.
Ballina Shire Council adds detail in Table 4.7 of its development control plan. Front fences above 1.2 metres need articulation and at least 50 percent visual permeability up to 1.8 metres, and a solid front fence needs a splayed area of 2.5 by 2.0 metres at the driveway. Laser cut and slat gates earn their keep here, because the pattern does the permeability work.
The exemption falls away on heritage, foreshore and flood controlled lots. One exempt rule says metal parts must be factory pre coloured, and how a raw rust finish is treated at the front boundary is a certifier question, so ask it before you order. Miss the standards and you need a complying development certificate or a development application.
How a Ballina gate job runs
Every job starts with the opening. Send us the width, the height, photos of the entrance and the style you are leaning toward. Our gates page and our Byron Bay gates page show the range and the custom work.
The design is settled, then the gate is fabricated at our Byron Bay workshop, and gate lead time runs 12 to 14 weeks. We work supply only, and when you want the gate installed, we arrange it through our network of trusted installers across Australia. Gates carry the same structural warranty as our sculptures, from 24 months to 5 years depending on the piece.
Matching fence panels at 2260 by 1000mm, from $395 a panel, carry the gate pattern down the boundary, and 3D numbers put the address on the pier in the same steel.
Get a quote for your Ballina gate
Tell us your opening width, your suburb and the style you want, and we will come back with a written quote. Start at our quote page and attach photos of the entrance if you have them.
Frequently asked questions
Do you install gates in Ballina or supply only?
We supply only, and installation can be arranged through our network of trusted installers across Australia. Gate lead time runs 12 to 14 weeks.
How much does a 3 metre corten gate cost in Ballina?
Our custom corten gates start from $2,750. Melbourne Gates publishes $2,250 to $6,250 supply only for a 3000mm steel driveway gate, so a corten single sits inside the published custom steel band.
Will a corten gate stain my new concrete driveway?
It can while the patina forms, because rain washes rust coloured water off new corten. Plan the drainage and the drip path first, and expect a full patina to take 18 to 36 months.
Is corten a good choice 500 metres from the beach in East Ballina?
500 metres sits inside the 2 kilometre caution band the primary sources name, so a site look comes first. A sheltered street can work with the right detailing, and spray exposed frontages are harder.
Do I need council approval for a front gate in Ballina Shire?
Usually no, when the gate meets the exempt standards, 1.2 metres at the front and no opening outwards. Heritage, foreshore and flood controlled lots lose the exemption, so check your lot first.
What warranty and lead time does a corten gate carry?
The same warranty as our sculptures, a structural warranty from 24 months to 5 years depending on the piece. Gate lead time runs 12 to 14 weeks.
Can my corten gate be automated later?
Yes, when the weight was planned for. Motors are picked on gate weight, oversized by 25 to 40 percent, and hipages puts automation at $1,950 to $2,300 on top of the gate.
Sources
- Steel Construction Institute, Guidance Note 1.07, weathering steel and coastal exposure.
- SSAB, weathering steel design and patina guidance.
- BlueScope, REDCOR weathering steel technical material.
- NSW Planning, fences and gates exempt development fact sheet.
- Ballina Shire Council, Development Control Plan 2012, Chapter 4, Table 4.7, and the Ballina Shire Local Strategic Planning Statement growth figures.
- Australian Bureau of Statistics, 2021 Census housing data for Ballina.
- hipages, How Much Do Driveway Gates Cost, 2026 guide.
- Melbourne Gates, steel gate and wrought iron price guide.
- BMGI, How Much Does an Automatic Gate Cost in Australia.
- Oxworks, corten screen specifications, and EasyGate, gate hinge and opening guidance.
- COR10 gate pricing, gate range, lead time, warranty and installation details.